Info-Mac Archive Downloads: cmp/ Compress-Translate

Back to /

158 files

a2basic-translator-09.hqx for MacOS 10.2.x and later (a2basic-09.hqx)

Download a2basic-09.hqx (209,212 KB)


From: "Louis C. Sacha"
Subject: a2basic-translator-09.hqx for MacOS 10.2.x and later

File: /cmp/a2basic-translator-09.hqx
Project: a2basicTranslator v0.9 (freeware)
Copyright (c) 2004 syndrome3D. All rights reserved.
Released 2004-05-02, Sunday May 2nd 2004
Author: Louis C. Sacha
URL: http://www.syndrome3d.com/dev/


The a2basicTranslator application allows Applesoft BASIC program
files created on Apple II computers to be converted into
human-readable text program listings, providing functionality similar
to the BASIC "list" command. This application will run on MacOS
10.2.x or later.

This 0.9 version of a2basicTranslator is capable of reading and
converting most Applesoft BASIC programs. Any uncorrupted program
should translate correctly, and some corrupted programs which contain
extraneous bytes or duplicate program lines can be translated
(although the resulting listing will reflect those errors). A
forthcoming 1.0 version will provide more control over the
translation process, allowing programs with more serious file format
errors to be translated as well, however there is no firm date when
that will occur (which is the reason why this older build of the
application is being released).



Acme Filters_236 (acme-filters-236.hqx)

Download acme-filters-236.hqx (85,827 KB)


From: Boston84@aol.com
Subject: Acme Filters_236


Acme Filters 2.3.6 (C)1997 by Eric V. Curtis All rights reserved

Acme Filters takes the place of many separate freeware/shareware
utilities you may be currently using. It started out as a simple
file converter to translate some old Smith-Corona word processor
files into text files I could use on my Macintosh. Then I realized
my code would make a good shell for any type of drag-and-drop filter.
So, I combined several filters I occasionally use into one "all-purpose"
drag-and-drop application. Full source code is also included so you
can add your own filters or modify the included filters.

Eric Curtis
boston84@aol.com




AF2MacPAF a new Mac PAF utility (af-to-macpaf-10.hqx)

Download af-to-macpaf-10.hqx (360,377 KB)


Date: Thu, 29 Sep 1994 15:16:26 -0500
From: dadams@ironwood.cray.com (David C. Adams)
Subject: AF2MacPAF a new Mac PAF utility



--========================_11901493==_
Content-Type: text/plain; charset="us-ascii"

AF2MacPAF v 1.0

This utility which I call AF2MacPAF will take a
GEDCOM that was created by the LDS "Ancestral File"
program and "clean" it up by translating the little
inconsistencies where Mac PAF and AF disagree on what
a GEDCOM file ought to look like.



--========================_11901493==_
Content-Type: application/mac-binhex40; name="AF2MacPAF_folder.sit"
Content-Disposition: attachment; filename="AF2MacPAF_folder.sit"


[*] AppleWorks to MS Works Translator (afe-appleworks-msworks.hqx)

Download afe-appleworks-msworks.hqx (11,004 KB)


Date: Tue, 25 Aug 92 14:14:51 -0400
From: Scott E Maxwell
Subject: [*] AppleWorks to MS Works Translator

Someone asked me to upload the free translator for AFE that
Microsoft produced. This translator will supposedly convert
AppleWorks documents to MS Works docs. I don't know if it
will handle the databse or spreadsheet portions or not. I
have been informed that this particular translator will only
handle documents of up to 20k in size (I have not verified
that myself). It would have been posted sooner, but I had
to check with Microsoft to make sure it was OK to post it.
They said enjoy!

Scott Maxwell
The University of Michigan
smaxwell@engin.umich.edu



Updated AFE EPSF Translator (afe-epsf-translator.hqx)

Download afe-epsf-translator.hqx (33,547 KB)


Date: Mon, 18 Oct 1993 20:14:38 -0500
From: markf@knot.QueensU.CA (Mark Fleming)
Subject: Updated AFE EPSF Translator



--========================_23676786==_
Content-Type: text/plain; charset="us-ascii"


This EPSF V2.0 translator is a shareware product.

The enclosed file contains stuffit file with ClarisWorks V2.0 document and
an Apple File Exchange Translator.

History...
V1.0.1 Fix minor bug in missing EOF on ASCII text files, and added
information about encapulated postscript files in this document.
V1.0.2 Added code to support AFE "Show only eligible files" option. Only
files starting with '%!PS' or the correct binary EPSF header will be listed
as eligible files.
V2.0.0 Added options to add the PostScript command showpage
convert TIFF preview image.




--========================_23676786==_
Content-Type: application/mac-binhex40; name="EPSF_AFE.sit"


MacBinary <==> Mac AFE Translators (afe-mac-to-macbinary.hqx)

Download afe-mac-to-macbinary.hqx (12,223 KB)


Date: Fri, 25 Oct 91 08:17:54 EST
From: pem@usage.csd.unsw.oz.au (Peter E. Middleton)
Subject: MacBinary <==> Mac AFE Translators

As requested Apple File Exchange translators for Mac to MacBinary
and back.

peter

Updated AFE TIFF Translator (afe-tiff-translator.hqx)

Download afe-tiff-translator.hqx (33,372 KB)


Date: Mon, 18 Oct 1993 19:56:15 -0500
From: markf@knot.QueensU.CA (Mark Fleming)
Subject: Updated AFE TIFF Translator



--========================_23676786==_
Content-Type: text/plain; charset="us-ascii"


This TIFF V2.0 translator is a shareware product.

The enclosed file contains stuffit file with ClarisWorks V2.0 document and
an Apple File Exchange Translator.

New features:

- Option to convert TIFF to PICT and copy PICT to clipboard.
- Updated documentation on TIFF file formats and limitions.

Old Features:

- check file header for TIFF files to select only TIFF file for translating.
- Set file type, and creator of TIFF file.




--========================_23676786==_
Content-Type: application/mac-binhex40; name="TIFF_AFE.sit"


Alex's Encrypt 1.0.1 FAT (alexs-encrypt-101.hqx)

Download alexs-encrypt-101.hqx (92,653 KB)


From: (Alessandro Levi Montalcini) alm@torino.alpcom.it
Subject: Alex's Encrypt 1.0.1 FAT

Price: Freeware
Source: ftp://ftp.alpcom.it/software/mac/LMontalcini

FAT VERSION - CONTAINS BOTH 680x0 AND NATIVE POWERPC CODE

Alex's Encrypt is a simple encryption utility that encrypts
one file at a time. The encryption key is stored in a
variable-length key file that can be as small as 512 bytes or
as large as the entire file to encrypt.
Using a key file instead of a password makes the encryption
only suitable for cases where the key can be stored in a
different location or sent separately to the receiver.
I built this utility so that I could store large encrypted
files in my ftp directory and send relatively small key files
by e-mail to the people that had to download them. Password
protection on the compressed archives was not enough, since it
still allowed everyone to peek at the archive's contents.

New in version 1.0.1:

- Now freeware, updated documentation and recompiled with
the CodeWarrior 9.


All JPEG a PICT to JPEG batch compresser (all-jpeg-10.hqx)

Download all-jpeg-10.hqx (19,394 KB)


From: Paul_C.H._Ho@mail.magic.ca
Organization: Magic
Date: Sat, 29 Oct 1994 13:18:31 EST
Subject: All JPEG a PICT to JPEG batch compresser

All JPEG 1.0 941028
Copyright(c)1994 Paul C.H. Ho and Pink Elephant Technologies. All rights
reserved.
This is Freeware.

All JPEG convert PICT files to QuickTime Photo-JPEG PICT.
+ Hold down option key before each convert to access the Standard
Compression dialog.
(You can use other codec or compression setting etc.)
+ It's fat! Accelerated for PowerMacintosh. Running native on both 68K and
PPC.

System Requirements
+ System 7 or later.
+ QuickTime 1.6.1 or later.

Special Thanks to:
Leonard Rosenthol, Marshall Clow, and Stephan Somogyi for DropShell 2.0.

Internet:
paulcho@io.org
Paul_C.H._Ho@magic.ca
CompuServe:
74020,772



DiskExpander 1.2 (alysis-disk-expander-12.hqx)

Download alysis-disk-expander-12.hqx (62,549 KB)


Date: Fri, 22 Jan 1993 21:45:01 -0500
From: "Scott E. Lasley"
Subject: DiskExpander 1.2

Here is Alysis' Disk Expander version 1.2 downloaded from the
Alysis Vendor area on Compuserve. from the Read Me file:
The Disk Expander is a system extension. Adding it to your Macintosh
System Folder will allow you to read and use files and applications
that have been compressed by More Disk Space. You will find that
applications are much smaller in compressed form and that they require
no extra time to launch. Compressed applications and compressed
document files behave exactly as you would expect them to. Even
multi-megabyte files will open without delay and without any disk
space overhead.


ArchiveCM 1.0.1 (archive-cm-101.hqx)

Download archive-cm-101.hqx (88,624 KB)


From: dathorc@jps.net
Subject: ArchiveCM 1.0.1


ArchiveCM is a contextual menu plugin which allows you to navigate the
contents of StuffIt archives through contextual menus.

Requirements:
- Power Macintosh
- Mac OS 8
- StuffIt Engine

Version 1.0.1 has been modified for easier localization, and now
automatically selects items extracted from an archive.

David Catmull
dathorc@jps.net
http://bounce.to/dathorc/
Sent with Cyberdog: Because it's not over until we say it's over...





ART Music 3.5.3c (art-music-353c.hqx)

Download art-music-353c.hqx (189,348 KB)


From: (Timothy A Herzog) herzo005@gold.tc.umn.edu
Subject: ART Music 3.5.3c

ART Music is a translator that converts Finale EPS files to Illustrator
format, so you can edit a page of music just like a graphic (add color,
other graphics, move notes, etc.). ART Music is FAT; it runs on 680x0
computers and runs native on Power Macintoshes.

This bug fix corrects a problem that causing inconsistent crashing on 68000
computers on startup. Sorry, folks, but honestly, it wasn't my fault.

Shareware: $20.00
------------------------------------------------
Timothy Herzog Two Bits Worth, Inc.
herzo005@gold.tc.umn.edu +1 (612) 227-2920


ASCIIEnc 1.1 (ascii-enc-11.hqx)

Download ascii-enc-11.hqx (32,661 KB)


From: David Kibrick
Subject: ASCIIEnc 1.1


ASCIIEnc is an AppleScript implementation of the Theta Pi TI-83
Encryption, consisting of 2 programs. ASCIIEnc encrypts files based
on a simple password, and offers a level of security somewhere
between ROT13 and full-fledged ciphers, while BlockEnc encodes off of
a block of random or customized values, which can be used as a
one-time pad for unbreakable security.



AutoBin 1.0 (auto-bin-10.hqx)

Download auto-bin-10.hqx (24,539 KB)


From: mxmora@unix.sri.com (Matthew Xavier Mora)
Subject: AutoBin 1.0
Date: Thu, 3 Feb 1994 17:04:37 -0800



--========================_7179424==_
Content-Type: text/plain; charset="us-ascii"

Enclosed is AutoBin 1.0. A drag and drop binhexer. I tried posting this
earlier but I think it bounced. I will be sending the source in another
message.

Xavier




--========================_7179424==_
Content-Type: application/mac-binhex40; name="AutoBin_1.0"


backup_by_stuffit_223e/AppleScript (backup-by-stuffit-223e.hqx)

Download backup-by-stuffit-223e.hqx (79,531 KB)


From: t-hana@mh1.117.ne.jp
Subject: backup_by_stuffit_223e/AppleScript


backup_by_stuffit_223e/AppleScript (Freeware),only for users of MacOS8.0
or later.

* This is an AppleScript script that will make a stuffed backup file by
StuffIt LIte 3.5 or later and automatically replace its content with
modified files.

* If you make a backup file into a floppy disk,the disk will be soon
full with files. But if backup files are stuffed,you can save backup
files almost twice as many.

* Once you choose which folder to backup into which disk,and let this
make a stuffed backup file in the disk, only by double-clicking,this
will choose files which in the original folder are modified after the
modification date of the backup file ,and replace these files in the
backup file.

* THIS VERSION COPES WITH THE CHANGE OF APPLESCRIPT WITH MACOS8.
$B!!(B USER OF MACOS7.6.1 OR BEFORE HAD BETTER USE 2.1.2.VERSION WHICH IS
FASTER.

* Ver2.2.3 removed another bug of causing error when folder contains
only one file.

* System requirement: MacOS8.0 or later,AppleScript1.1.2

* You need a registered version of StuffIt Lite 3.5 or later.



BinHex 5.0 (binhex-50.hqx)

Download binhex-50.hqx (24,206 KB)


From: jbthoo@ucdavis.edu ( John Thoo )
Date: Wed, 2 Sep 92 18:48:55 PDT
Subject: BinHex 5.0


Here is BinHex 5.0.
Hope that someone finds this useful.

--John.

[Bill--Again, sorry for the earlier goof-up ]

----------------------------------cut here--------------------------------

* BinHqx 1.02 DA (binhqx-102.hqx)

Download binhqx-102.hqx (33,857 KB)


From: Masatsugu Nagata
Date: Thu, 12 Aug 93 18:02:40 JST
Subject: * BinHqx 1.02 DA

This looks like a good solution if one needs a small binhex conversion
util.
----------------------------Original message----------------------------
Hello,

Enclosed below is Howard Fukuda's excellent Desk Accessory
"BinHqx 1.02 DA'. Shareware $5. It dates 1990, but works
very fine with System 7. Handles both Encoding/Decoding BinHex,
plus, 'Join&Decode' and 'Segment' features.

By setting the 'I/O buffer size' to the maximum, it operates
VERY quickly. Works twice/threetimes faster than StuffIt's
translator!

Hope you enjoy it:

> Date: Wed, 5 Dec 90 02:37:13 PST
> From: physi-hf@garnet.berkeley.edu (Howard Haruo Fukuda)
> Subject: BinHqx 1.02
>
>
> After downloading some files from the um-mts.cc.umich.edu archives, I
> found that BinHqx 1.01 has problems when spaces are inserted in the middle
> of archives. This seems to happen occasionally after a line-feed. 1.02
> corrects that problem.
>
> BinHqx is a Desk Accessory that does BinHex 4.0 translation in addition to
> file joining/splitting. Major advantages are convenience and speed, but it
> is ShareWare. Please register your copy.
>
> -----------------------------------


Submission... (business-card-importer.hqx)

Download business-card-importer.hqx (161,461 KB)


Date: 5 Nov 1994 00:17:33 -0500
From: "John Endres"
Subject: Submission...

Here's a program for the ftp sites:

Business Card Importer is an application that allows a PowerTalk personal
catalog to be populated with business cards from data in a text file. It
will create addresses in the business cards that are compatible with most
personal or server gateways, especially those from StarNine.

Thanks,
John Endres



CC Converter 1.3 submission (cc-converter-13.hqx)

Download cc-converter-13.hqx (128,540 KB)


Date: Sun, 19 Mar 1995 23:08:31 +1000
From: Kevin.Sanderson@path.utas.edu.au (Kevin Sanderson)
Subject: CC Converter 1.3 submission

CC converter is a utility that converts information downloaded from several
online bibliographic databases into Refer/BibIX format so that it can be
imported by bibliographic programs such as EndNote and ProCite.

Changes in version 1.3

- requires System 7.0 or later
- fat binary, runs native on Power Macintosh
- converts CD Plus reprint format information
_ background conversion
_ drag and drop processing of files within folders

Kevin Sanderson

Department of Pathology email: Kevin.Sanderson@path.utas.edu.au
University of Tasmania phone: 61 002 35 4825


cdmd.sit.hqx, compression/utils (cdmd.hqx)

Download cdmd.hqx (252,691 KB)


From: firewalker@hol.fr
Subject: cdmd.sit.hqx, compression/utils

Compact DocMaker documents compacts DocMaker documents better than
Compact Pro or StuffIt.



Cico 1.0 (cico-10.hqx)

Download cico-10.hqx (10,535 KB)


Date: Fri, 3 Mar 1995 00:17:16 -0400
From: Adam_Doppelt@brown.edu (Adam Doppelt)
Subject: Cico 1.0

Cico (pronounced "psycho") converts a Microsft Windows .ICO file to a
Macintosh icon. There have recently been a couple of requests for
such a thing.

Thanks!

Adam


Cipher 1.0 (cipher-10-hc.hqx)

Download cipher-10-hc.hqx (29,425 KB)


Date: Tue, 25 Aug 1992 11:53:32 -0500
From: clarke.stevens@gtri.gatech.edu
Subject: Cipher 1.0

Cipher is a Hypercard stack that will encode and decode secret messages
using simple substitution or Vigenere crytosystems. It uses English
language statistics to assist in cracking messages when the key or alphabet
used to encode it is unknown. Examples are provided and a explanatory help
file is included in the stack. Cipher is handy for people who want to
exchange secret messages or for people who want to learn more about
cryptosystems.

-------------------------------
J. Clarke Stevens
Georgia Tech Research Institute
(404) 528-3254
clarke.stevens@gtri.gatech.edu

CoDec (co-dec-105.hqx)

Download co-dec-105.hqx (74,496 KB)


Date: Mon, 4 Jul 1994 11:21:18 -0400
From: bw16@cornell.edu (Bretton Wade)
Subject: CoDec



--========================_18537340==_
Content-Type: text/plain; charset="us-ascii"

a bug fix for CoDec 1.0.4, fixes a problem with 24 bit addressing and
multiple monitors. Please replace the CoDec 1.0.4 with this, CoDec 1.0.5.

Thank you,

Bretton Wade



--========================_18537340==_
Content-Type: text/plain; name="CoDec105.sea.hqx"; charset="us-ascii"
Content-Disposition: attachment; filename="CoDec105.sea.hqx"


code-programs.sit.hqx (code-programs.hqx)

Download code-programs.hqx (82,993 KB)


From: Russell Cotton
Subject: code-programs.sit.hqx
Date: Sun, 6 Feb 1994 20:17:27 -0600 (CST)

--0-914575609-760587725:#16460
Content-Type: TEXT/PLAIN; charset=US-ASCII

Dear netters,

Here is my first REAL mac program. The stuffit archive contains two
programs, EnCodeIt and DeCodeIt. These programs encode and decode up to
512 characters of text, respectively. The files are stored in an internal
format and are not readable by text proccessors. These programs are
Freeware but I will accept any money, postcards, and/or e-mail.

Thanks for listening (read: reading),
Lance Cotton
rcotton@tenet.edu

--0-914575609-760587725:#16460
Content-Type: APPLICATION/octet-stream; name="code-programs.sit.hqx"
Content-ID:
Content-Description:


Compact Pro D-1.51 (German) (compact-pro-151-de.hqx)

Download compact-pro-151-de.hqx (231,927 KB)


Date: 31 Mar 95 19:17:51 EST
From: "Bill Goodman [Cyclos]" <71101.204@compuserve.com>
Subject: Compact Pro D-1.51 (German)

German language version of Compact Pro. Compact Pro is a shareware
file compression and archival utility. It compresses and stores files
in "archives" which may span multiple diskettes. Compact Pro supports
data encryption (US and Canadian users only) and self-extracting archives.
Version D-1.51 is a "fat" binary, so it will run in native mode on Power
Macs as well as on standard Macs.

Compact Pro may be used on a free trial basis for 30 days. If you find
it useful and continue to use it beyond the free trial period, you are
required to pay a $25 registration fee. Self-extracting archives created
by Compact Pro may be used for commercial distribution of software/data
with no additional license fee.

This file is a self-extracting archive created with Compact Pro.
Double-clicking on it will create a folder with the Compact Pro
application and documentation files.

Bill Goodman
Cyclos
71101.204@compuserve.com


Compact Pro F-1.51 (French) (compact-pro-151-fr.hqx)

Download compact-pro-151-fr.hqx (245,390 KB)


Date: 31 Mar 95 19:21:43 EST
From: "Bill Goodman [Cyclos]" <71101.204@compuserve.com>
Subject: Compact Pro F-1.51 (French)

French language version of Compact Pro. Compact Pro is a shareware
file compression and archival utility. It compresses and stores files
in "archives" which may span multiple diskettes. Compact Pro supports
data encryption (US and Canadian users only) and self-extracting
archives. Version F-1.51 is a "fat" binary, so it will run in native
mode on Power Macs as well as on standard Macs.

Compact Pro may be used on a free trial basis for 30 days. If you
find it useful and continue to use it beyond the free trial period,
you are required to pay a $25 registration fee. Self-extracting
archives created by Compact Pro may be used for commercial
distribution of software/data with no additional license fee.

This file is a self-extracting archive created with Compact Pro.
Double-clicking on it will create a folder with the Compact Pro
application and documentation files.

Bill Goodman
Cyclos
71101.204@compuserve.com


Compact Pro J-1.51 (Japanese) (compact-pro-151-jp.hqx)

Download compact-pro-151-jp.hqx (232,392 KB)


Date: 02 Apr 95 14:11:40 EDT
From: "Bill Goodman [Cyclos]" <71101.204@compuserve.com>
Subject: Compact Pro J-1.51 (Japanese)

Japanese language version of Compact Pro. Compact Pro is a shareware
file compression and archival utility. It compresses and stores
files in "archives" which may span multiple diskettes. Compact Pro
supports data encryption (US and Canadian users only) and
self-extracting archives. Version J-1.51 is a "fat" binary, so it
will run in native mode on Power Macs as well as on standard Macs.

Compact Pro may be used on a free trial basis for 30 days. If you
find it useful and continue to use it beyond the free trial period,
you are required to pay a $25 registration fee. Self-extracting
archives created by Compact Pro may be used for commercial
distribution of software/data with no additional license fee.

This file is a self-extracting archive created with Compact Pro.
Double-clicking on it will create a folder with the Compact Pro
application and documentation files.

Bill Goodman
Cyclos
71101.204@compuserve.com


Compact Pro 1.51 (compact-pro-151.hqx)

Download compact-pro-151.hqx (230,310 KB)


Date: 02 Apr 95 14:08:05 EDT
From: "Bill Goodman [Cyclos]" <71101.204@compuserve.com>
Subject: Compact Pro 1.51

Compact Pro is a shareware file compression and archival utility.
It compresses and stores files in "archives" which may span multiple
diskettes. Compact Pro supports data encryption (US and Canadian
users only) and self-extracting archives. Version 1.51 is a "fat"
binary, so it will run in native mode on Power Macs as well as on
standard Macs.

Compact Pro may be used on a free trial basis for 30 days. If you
find it useful and continue to use it beyond the free trial period,
you are required to pay a $25 registration fee. Self-extracting
archives created by Compact Pro may be used for commercial
distribution of software/data with no additional license fee.

This file is a self-extracting archive created with Compact Pro.
Double-clicking on it will create a folder with the Compact Pro
application and documentation files.

Bill Goodman
Cyclos
71101.204@compuserve.com


CptExpand 1.00 (cpt-expand-10.hqx)

Download cpt-expand-10.hqx (31,858 KB)


Date: Sun, 15 Mar 92 20:24:35 -0500
From: phssra@unix.cc.emory.edu (Scott R. Anderson)
Subject: CptExpand 1.00

[This is a replacement for a year-old file in the archives
which was damaged.]

CptExpand 1.00 is a freeware utility to decompress Compact Pro
archives. It is written by Bill Goodman, the author of Compact
Pro. The advantage of this program over Extractor, the other
free Compact Pro decompression utility, is that it is small
enough to run in 512K of memory. However, if you don't have the
Hierarchical File System (HFS), you will need to install the
HD20 INIT in your System folder. This can usually be obtained
from Macintosh user groups or from on-line services such as
Compuserve.

CptExpand has the same creator type as Compact Pro, which allows
it to automatically open when such an archive is double-clicked
(but it should then only be used if you *don't* use Compact Pro
or Extractor).


[*] CRLF v.1.2.0 (crlf-120.hqx)

Download crlf-120.hqx (30,212 KB)


From: SAKIMURA@sscl.uwo.ca (Natsu Sakimura)
Subject: [*] CRLF v.1.2.0
Date: Sat, 26 Feb 1994 15:04:22 -0500 (EST)

Attached please find the sit-hqx archive of CRLF
version 1.2.0. This version added the following features:

1) Balloon help
2) A bug fix for CR->CR conversion.

Hope it will be useful.

Best wishes,

Natsu Sakimura


CRLF -- a CR<->LF<->CRLF file converter
=======================================
FILE: CRLF
ver.: 1.2
Type: Application
Author: Natsu Sakimura
Date: 1994.02.21
System Requirement: System 7.0 or later
Distribution: DONATEWARE(Freeware) (see Asking your favour:
section below for terms and conditions)

Description:
------------
CRLF is a drag & drop application which performs
the conversion of CR(Mac), LF(Unix) and CRLF(PC) files. It
auto-detects the end of line code of the file which was
dropped and converts to the desired file type. Once you
have set up the preference, you will rarely need to make
any interaction with CRLF later.

CRLF converts the file "in place". The filename stays the
same before and after the conversion. You will notice that
it was converted just by looking at the icons. You can
set up these icons by specifying the creator for each type
of output file.

Also, CRLF is capable of dealing with Japanese text, unlike
some other similar utilities.

New Features:
-------------
Fixed the bug that did not process the file properly if
the input and output EOL characters were the same.
Thus, you can now use it to just change the creator.


Cross Platform 1.1.1 - Mac to Windows Consultant (cross-platform-111.hqx)

Download cross-platform-111.hqx (264,291 KB)


From: Gideon Greenspan
Subject: Cross Platform 1.1.1 - Mac to Windows Consultant

Cross Platform provides information about how the programs and files on a
Macintosh can be used with Windows-based computers. It also functions as
an excellent disk-cataloging tool.

There are three main types of user who will need it: users needing to
share files with Windows-based computers, Macintosh users needing to work
on Windows computers, and users wishing to catalogue and analyze the
files on their computer.

The Cross Platform Database contains information on over 400 file
formats. Cross Platform reports are fully customizable, include
sophisticated filtering and May be saved to text files or printed out for
hard copy.

Version 1.1.1 adds a switch for Navigation Services and better support
for the Appearance Manager.



Crypt-04 : desk scrap encryptor. new version (crypt-04.hqx)

Download crypt-04.hqx (38,895 KB)


Date: Tue, 6 Dec 1994 13:40:16 -0700
From: "Timothy C. A. Molteno"
Subject: Crypt-04 : desk scrap encryptor. new version

Crypt version 0.4

This contains two freeware utilities for encrypting mail. Major
improvements over version 0.3 are :
1) Can encrypt/decrypt PICT's
2) Much Faster encryption and decryption.
3) Windows and UNIX versions coming soon :)

¥ Crypt 0.4.1 : A desk accessory which can encrypt TEXT and PICT's
to a mail-robust TEXT. The data to be encrypted is copied to the
desk scrap from any application.

¥ sCrypt 0.4 : A very simple mac editor with an encrypting feature.
This could be used to keep a secret diary, or composing memo's to
be mailed as encrypted files.

The encryption technique is a relatively good pseudo random number
generation scheme. Not unbreakable, but close enough for practical
purposes.

These file are copyright (c) Tim Molteno 1994. All rights reserved.
Any questions, contact tim@physics.otago.ac.nz.



CypherCard1.0a.sit.hqx (cyphercard-10a.hqx)

Download cyphercard-10a.hqx (150,387 KB)


From: Chris Westbury
Subject: CypherCard1.0a.sit.hqx

Cyphercard is a simple but effective tool (a
Hypercard stack) for encoding and decoding text
documents. It uses no complex math, but simply
encodes one document (the target) by using a second
document as a reference document or a 'one time
scratch pad', as they call it in the cypher biz.
Cyphercard does not just use simple pointers into the
reference document, but modulates those pointers
using offsets which are also taken from that
document. It uses various other encoding techniques
as well.

None of this is complicated or tricky. It doesn't
need to be. The security of the code is not
compromised at all by knowing exactly how it was
coded. All the security comes from the fact that the
code depends on the reference document and the
password. The upshot is that anyone who knows which
reference document and password to use can decode any
document that was encoded with that reference
document and password. Anyone who does not know that
document and password will not be able to decode the
target document.

Cyphercard requires a PowerPC Macintosh and Hypercard 2.4.


DataConverter 1.3 (data-converter-13.hqx)

Download data-converter-13.hqx (53,005 KB)


From: bdurand@artic.edu (Brian Durand)
Subject: DataConverter 1.3

DataConverter is a fairly simple, yet powerful, program for parsing large
fixed record length datafiles (i.e. each record is defined as containing a
certain number of characters) into tab or comma separated data files which
can then be imported into most Macintosh database applications. This
allows data dumps from most coporate databases to then be viewed and
manipulated on a Mac so that you can search the data as you like, generate
whatever reports you need yourself, or whatever.

This new version allows files with records of up to 5000 characters in
length to be parsed, and adds some improvements to the user interface.


No Subject! (data-parser-41-hc.hqx)

Download data-parser-41-hc.hqx (47,918 KB)


From: Jasper Kips
Subject: No Subject!
Date: Thu, 26 May 1994 18:06:27 +0100 (MET)

Data Parser 4.1

Data Parser is a nifty ÔlittleÕ stack for transforming data
from Column format to Delimited format or to change the
delimiter of your data file.

Why should you want to do that? Well, basically because the
statistical software you use wants the data in a specific
format. E.g. a certain widely used statistical package for
mainframes likes its data to be in column format, while a
widely used spreadsheet for the Macintosh wants its data in
ÔTabÕ or ÔcommaÕ delimited format. (OK, a spreadsheet is NOT
statistical software, but it just goes as an example.)
Although most statistical software offers services for the
exchange of data between packages, usually, at least in my
experience, the one you need just isn't there. So faced with
the need to move data from a mainframe to my Macintosh, and
the complete lack of portability of the data files I
conceived, created and wrote Data Parser.

Do NOT rename data parser, at least ont function in it
relies on the fact that the stack is named "Data Parser 4.1"

Data Parser NEEDS Hypercard 2.1 or later. It has been tested
on a Classic running system 6.0.7 with 2.5 Mb of RAM and
Hypercard 2.1

Data Parser is Use ware, if you find it usefull USE it.

Jasper Kips

---------------------------------------------------------------

dd-expand-40.sea.hqx (dd-expand-40.hqx)

Download dd-expand-40.hqx (181,395 KB)


From: jtc1@cornell.edu (John T. Chapman)
Subject: dd-expand-40.sea.hqx
Date: Mon, 20 Dec 1993 14:54:56 -0500



--========================_15215632==_
Content-Type: text/plain; charset="us-ascii"

>From the DiskDoubler 4.0 distribution disk.

This is a self-extracting archive of the free DDExpand utility used to
expand files compressed by AutoDoubler and DiskDoubler. The new version is
required to expand files/archives compressed by DiskDoubler 4.0.

Disclaimer: I have no relation to Symantec, Fifth Generation, or Salient,
other than as a satisfied user of their products.



--========================_15215632==_
Content-Type: application/mac-binhex40; name="DD_Expand.sea"
Content-Disposition: attachment; filename="DD_Expand.sea"


DeArj.sit.hqx (de-arj.hqx)

Download de-arj.hqx (20,897 KB)


Date: Fri, 1 Oct 93 22:21:54 PDT
From: buccolm@CSOS.ORST.EDU (Arg0n)
Subject: DeArj.sit.hqx


DeArj.sit.hqx sould go in the /info-mac/util directory.

DeArj is the fastest Arj decompressor on the mac. It is also the only one with
a Mac interface. Arj is a compression format commonly used on IBMs.


Decode da Code 1.5 (decode-da-code-15.hqx)

Download decode-da-code-15.hqx (152,072 KB)


From: Lucius Kwok
Subject: Decode da Code 1.5

Version 1.5 of Decode da Code adds two new options for handing filenames and
post-processing. Decode da Code is an application which takes base64 and
uuencoded binary file attachments commonly found on email and newsgroup
postings, and decodes them into a more useful format.

The new version adds an option to disable launching post-processing
applications, and another option to truncate the extensions off of long
filenames.

Decode da Code is built for Mac OS X, and is a Carbon App, which means that
you can use it in Mac OS X without having to run the Classic environment.

Decode da Code Page - http://www.felttip.com/products/decode/


Decoder 3.0 Fr (decoder-30-fr.hqx)

Download decoder-30-fr.hqx (1,843,419 KB)


From: John Daniel
Subject: Decoder 3.0 Fr

Decoder 3.0 (en franais) - C'est un programme de "drag et drop" qui
dŽcodera les fichiers en format yEnc, MIME (Base64), UUencoded, AppleSingle,
MacBinary (I, II, et III), et Binhex.

Glissez les fichiers et les dossiers sur l'application et elle dŽterminera
l'arrangement de codage correct et les dŽcodera en consŽquence. Les
fichiers en format MIME seront convertis en HTML. ‚a marche bien avec un
newsreader et AOL. Milliers d'utilisateurs satisfaits.

Exige: Systme 7, Internet Config ou plus tard, PowerPC ou 68020. Les
versions de MacOS X et de Windows sont Žgalement disponibles.

Shareware - $ 20.00

John Daniel

Etresoft
info@etresoft.com
www.etresoft.com


Decoder.dmg - Submission of Decoder X 3.0 (decoder-30-x.hqx)

Download decoder-30-x.hqx (3,241,415 KB)


From: John Daniel
Subject: Decoder.dmg - Submission of Decoder X 3.0

Decoder 3.0 - This is a drag and drop program that will decode yEnc, MIME
(Base64), UUencoded, AppleSingle, MacBinary (I, II, and III), and BinHex
files.

Just drop the files onto the application and it will determine the correct
encoding scheme and decode accordingly. Converts MIME files info HTML. Works
great with newsreaders and AOL e-mail. Thousands of satisfied users.

Requires: MacOS X 10.2
Classic MacOS and Windows versions are also available.

Shareware - $ 20.00

John Daniel

Etresoft
info@etresoft.com
www.etresoft.com


Decoder.sea.hqx - Update of Decoder 2.1 (decoder-30.hqx)

Download decoder-30.hqx (1,797,639 KB)


From: John Daniel
Subject: Decoder.sea.hqx - Update of Decoder 2.1

Decoder 3.0 - This is a drag and drop program that will decode yEnc, MIME
(Base64), UUencoded, AppleSingle, MacBinary (I, II, and III), and BinHex
files.

Just drop the files onto the application and it will determine the correct
encoding scheme and decode accordingly. Converts MIME files info HTML. Works
great with newsreaders and AOL e-mail. Thousands of satisfied users.

Requires: System 7, Internet Config 1.2 or later, PowerPC or 68020 machine.
MacOS X and Windows versions are also available.

Shareware - $ 20.00

John Daniel

Etresoft
info@etresoft.com
www.etresoft.com


util - DeHQX 2.0.1 (dehqx-201.hqx)

Download dehqx-201.hqx (38,830 KB)


Date: Thu, 29 Jul 1993 11:37:45 +0800
From: Peter N Lewis
Subject: util - DeHQX 2.0.1


DeHQX v2.0.1 is an application to decode BinHex 4.0 encoded documents.
It will ignore all headers and comp.binaries.mac part seperators,
handles multiple encoded documents in one file, or split across multiple
files, decode files or folders of files. It runs happily in the background
with little affect on foreground processes. Its not all that fast, so
just drop the files on DeHQX and then ignore it and they will be magically
decoded.

This version corrects an incompatibility with AppleScript. Hopefully I haven't
added any new bugs, I haven't looked at this code in years. I strongly
recomend you look at StuffIt Expander if DeHQX is any use to you, since it
does most of what DeHQX does, and a lot more (and its free too).

DeHQX is free for any use (except you can't resell it). The source for
DeHQX 2.0.0 is available, I haven't updated it because the changes were
very minor.

Enjoy,
Peter.

DeHQX v2.0.1, (C) 1991-93, Peter Lewis


Delta Image 0.9b8 (delta-image-09b8.hqx)

Download delta-image-09b8.hqx (34,222 KB)


Date: Fri, 10 Feb 1995 14:10:09 -0800
From: chris_kohuch@sunshine.net (Chris Kohuch)
Subject: Delta Image 0.9b8

Delta Image is a drag and drop application that converts images to Roger D.
Bates shareware DiskDup+ image format. Supported image file types are:

Apple Dart
Apple DiskCopy
DiskMaker
DiskMaster
MacTool's FastCopy
Norton Floppier
ShrinkWrap


[*] DeSEA 1.5 (desea-15.hqx)

Download desea-15.hqx (31,998 KB)


From: "Ken Hancock"
Subject: [*] DeSEA 1.5
Date: Thu, 16 Jun 1994 17:36:59 -0400 (EDT)


Enclosed is a StuffIt 3.0 archive containing DeSEA 1.5. DeSEA is a
System 7 savvy application which turns self-extracting archives
(SEA's) into their non-self-extracting counterparts. DeSEA supports
AppleEvents and System 7's drag 'n' drop from the Finder. Freeware.

DeSEA 1.5 adds support for NOW Compress and DiskDoubler 4.0 archives.
DeSEA 1.5 also fixes background-only operation when used in
conjunction with applications such as Fetch 2.1.2.

Enjoy!

--
Ken Hancock | INTERNET: kenh@vgi.com / AOL: KHancock
VideoGuide Inc. | CIS: INTERNET>: kenh@vgi.com


no subject (file transmission) (down-line-111.hqx)

Download down-line-111.hqx (116,518 KB)


From: rri!eric@vtserf.stanford.edu (Eric)
Subject: no subject (file transmission)
Date: Tue, 22 Oct 91 21:41:19 EDT

Here is DownLine 1.1.1. New features include Binhexing and
Stuffing, Binhex mail header saving, process logging and
System 7.0 drop file/folder operation. Have at it.

Eric.


Name: DownLine
Version: 1.1.1
Categories: archive utility

[part 1]


Downer.sit.hqx (downer.hqx)

Download downer.hqx (6,220 KB)


Date: Fri, 1 Oct 93 22:24:30 PDT
From: buccolm@CSOS.ORST.EDU (Arg0n)
Subject: Downer.sit.hqx


Downer.sit.hqx sould go in the /info-mac/util directory.

Downer is a useful utillity that will automatticly turn off your computer
after a set number of idle seconds. Downer alows you to use "dont shutdown
points" Where if the mouse is in that location the computer will not shutdown.


Drop Text version 1.5 (drop-text-15.hqx)

Download drop-text-15.hqx (34,763 KB)


From: Todd Wilson
Subject: Drop Text version 1.5
Date: Tue, 21 Jun 1994 17:01:37 -0400 (EDT)

--1915860659-1186818715-772232655:#16269
Content-Type: TEXT/PLAIN; charset=US-ASCII


--------------------
About Drop Text 1.5:
--------------------

This is a drag-and-drop text file converter. It can convert between
Mac, Unix, and MS-DOS files, and can convert AppleWorks AWP files
into text. It has lots of nice features and safty checks, and can
convert more than one type into the target type at a time
(ex: Mac and Dos into Unix).

Packed with StuffIt; docs included; source code available (just ask).

============
Please note:
============
This time, the uploader *IS* the author! tdwilson@freenet.columbus.oh.us


Stuff new with this version (1.5):

* Improved (hopefully) the file detection and line conversion.
* Improved the trailing space stripper.
* Changed the way the progress bar works.


Stuff new with version 1.4:

* Corrected dialog problems.
* Corrected a compile problem with Think C.
* Changed the program so that it creates the workfile in the same
directory as the file being changed. This allows files on floppies
to be changed.
* Added option to always go into the Options dialog for each file (as
if the Option key was always held down).
* Changed About box and Creator type.


Stuff new with version 1.3:

* Updates Finder info faster.
* Converts AppleWorks Word Processor files to text.
* Allows optional stripping of the high bit of text.
* Dialog fixes.

Stuff new with version 1.2:

* doesn't wreck with buss error in dialogs any more.
* can change file/creator type of file(s) processed.
* can remove trailing spaces/tabs from lines.

Stuff new with version 1.1:

* strips bit 7 from text files.
* can handle more than 40 files at a time.
* works better with b&w systems.
* less occurance of "buss error" on startup.
* progress dialog doesn't whip in and out.
* faster overall.


---------------------------------
"Sir: Read the !%*$?&^@# MANUAL!"

--1915860659-1186818715-772232655:#16269
Content-Type: APPLICATION/octet-stream; name="Drop_Text_1.5.hqx"
Content-ID:
Content-Description:


DropBin v1.5 (dropbin.hqx)

Download dropbin.hqx (21,409 KB)


From: bill@catambay.com
Subject: DropBin v1.5


DropBin is a slim and trim drag and drop binhexer application. Drop any
file or files on the application, and they are automatically binhexed. A
great utility for converting your binaries to binhex for uploading to web
and FTP spaces.

Bill Catambay
Excalibur Software
http://www.catambay.com/excalibur




DandStoQIF2 - Convert from Dollars and Sense to Quicken (ds-to-qif-converter.hqx)

Download ds-to-qif-converter.hqx (53,304 KB)


From: willcox@allegro.urbana.mcd.mot.com
Subject: DandStoQIF2 - Convert from Dollars and Sense to Quicken
Date: Wed, 26 Jan 94 13:54:32 -0600

This program should make life easier for those who are converting from
Dollars and $ense to Quicken. It converts a file with transactions
exported from Dollars and $ense to Quicken's QIF format. Source is
included. Macintosh user interface guidelines are NOT followed, but
this should be a program that you only have to use once.

This is a self-extracting archive.

This version automates more of the process than the original version
that was posted in mid-1993. It can take its input from one big report
instead of requiring a separate input file for each account. It
doesn't require hand editing of the input file. It has addresses the
problem of transactions that transfer between two accounts and that are
cleared in both.

This should replace the existing dandstoqif.hqx file in the archive.


Easy Installer 1.0 (easy-installer-10.hqx)

Download easy-installer-10.hqx (18,125 KB)


From: (elliot smith) smithe@minot.com
Subject: Easy Installer 1.0

This upload is to save you the time of creating the installer
yourself and also to give you the idea. This self-installing
archive installs control panels, extensions, preferences, etc. into
the system folder, and can install stuff into root as well. It's not
as refined or as idiot-proof as a Stuffit Installer Maker installer
but it does work, is easier to create, and I believe Compact Pro is
also cheaper.

What it's good for:
*Creating a product installer
*ORGANIZING YOUR COLLECTION OF INITS AND CDEVS.

The sysem folder is not a good place to keep anything you plan on
keeping beyond the next system melt down. Put your inits/cdevs into
this installer once and for all. Double click and they're installed.

If you do use Compact Pro, please pay the [inexpensive] Compact Pro
shareware fee. Note: I have nothing to do with Compact Pro - I'm
just a satisfied user.

May be included on the CD-ROM. It's freeware, but it
requires the Compact Pro shareware program.


EncodeScripts.sit (encode-scripts.hqx)

Download encode-scripts.hqx (18,635 KB)


From: poetink@inlink.com
Subject: EncodeScripts.sit


The EncodeScript package is a set of two AppleScript applets which will
use StuffIt Deluxe 4.0 to either UUEncode or BinHex files without
compressing the files. You must have StuffIt Deluxe in order to use these
scripts.


The EncodeScript package is free but copyright 1997 by Matthew W. Schmeer
and Poetry Ink Productions. Please see the enclosed Read Me file
for more information.

We give our permission for this file to be included
on the Info-Mac CD-ROM, with our usual stipulations.

Thank you.

Matthew W. Schmeer




Encryplet fc1 (encryplet-10fc1-as.hqx)

Download encryplet-10fc1-as.hqx (98,390 KB)


From: (Raif S. Naffah) raif@FL.NET.AU
Subject: Encryplet fc1

I'm attaching to this message the final client version 1 of Encryplet.

Encryplet is a US$5 shareware AppleScript(R) droplet which makes it
easy to encrypt and decrypt files by drag-and-dropping them onto a
Desktop Encryptor icon (similar to the Desktop Printer icons in
QuickDraw GX and System 7.5.1 and later).

Encryplet relies on your AppleScript-aware version of Philip
Zimmermann's PGP software ‚MacPGP(R)‚ to perform encryption and
decryption.

Because PGP also compresses data when encrypting it, Encryplet can
also be useful as an easy-to-use, effective data compression utility
while it secures your private information - I was able to reduce some
text files to 27% of their original size.

cheers;

Raif S. Naffah
Type & Graphics Pty Limited (ACN 061 642 779)


Enigma for Macintosh 1.0 (enigma.hqx)

Download enigma.hqx (673,715 KB)


From: Mitchell J Laurren-Ring
Subject: Enigma for Macintosh 1.0

Enigma is anti-telemarketing software that guides its users in the art of
making telemarketers stop calling. Enigma is freeware.

Enigma may be included on any CD-ROM compilation but not sold without the
author's consent.

Mitchell J Laurren-Ring
mick@rynosoft.com


EnScrypt (enscrypt-lite.hqx)

Download enscrypt-lite.hqx (14,315 KB)


From: Hudson Barton
Subject: EnScrypt

You may include this program anywhere. Keywords for placement in Infomac
archives: security, encryption, applescript, developers.

It will work on any Mac. Requires at least OS 7.6 . The attached file is
a Lite version of EnScrypt for the Mac, and it's free. This is also a more
powerful and custom version . Pricing available on request.


What Is EnScrypt?

It is sophisticated software to do encryption. Built as a "Scripting
Addition", EnScrypt is an indispensable tool for software developers,
script writers and anyone needing to provide encryption security on
the Macintosh platform. Encryption is provided for EnScrypt by the
"Blowfish" algorithim. "Blowfish" is one of several very secure and
well-known symmetric encryption algorithims.

EnScrypt (Lite): Freeware. This is a demo version of EnScrypt which
is restricted in the power of its encryption, but its 24 bits of
encryption power make it satisfactory for many security purposes. It
is available via FTP at ftp://ftp.highwinds.com, and as an email
attachment via autoresponder at
mailto://1001-EnScryptLite.sit@ar.highwinds.com

EnScrypt (Custom): This is a proprietary version of EnScrypt only for
Macintosh developers. It uses strong encryption (56 bits and higher),
and is released only with customized access codes. Proprietary
versions can be developed for anyone subject to export restrictions.
Prices for licencing available upon request.
More information: mailto://support@highwinds.com data security package that
brings data access protection and data validation functions to the 4th
Dimension environment in the form of a standard 4D plug-in. Available on
both Macintosh and Windows platforms, it uses industry standards to
provide both a one-way hash function and a public key digital
signature for text and string values. DataProtector's one-way hash
function can be used to provide context specific password features
such as requiring management validation for large orders or checks;
password verification for access to sensitive data; and any other
function where a password can be stored within a data file.
DataProtector's digital signature function can be used to verify that
a particular piece of data was created by the person who claims to
have created it. It also verifies that the data has not been modified
since it was created. Digital signatures are especially useful for
communications between remote 4D systems.

HIGHWINDS TRADING COMPANY http://www.highwinds.com
Wilmington, DE USA Technology for Email and Security



New Macintosh Application adds PGP + Voice encryption to Eudora (envelope-10.hqx)

Download envelope-10.hqx (881,219 KB)


From: johnloch@mtt.com
Subject: New Macintosh Application adds PGP + Voice encryption to Eudora

envelope v1.0

The envelope v1.0 application adds MacPGP encryption and encrypted voice email to
any version of the popular Eudora email application. A customizable, floating
toolbar provides one click access for encrypting and decrypting email; mailing
and adding keys to your keyring; and recording and playing encrypted voice email
messages. The envelope v1.0 application also supports drag and drop encryption
and decryption of files.

The envelope v1.0 application is currently available for the Mac OS only. A
Windows 95 version will be released in May 1997. A free 30-day, fully-functional
demonstration version of envelope v1.0 is available at:

http://www.mtt.com/envelope

System Requirements:

* Mac OS based computer with 68020 processor or higher, Power Macintosh or Power PC based computer
*System 7.1 or later
*2.5 MB of available memory (RAM) to run envelope v1.0
*1.5 MB of disk space to install envelope v1.0
* Microphone/Speakers for recording and playing voice messages
* Any freeware or commercial version of Eudora (1.5.4 or higher, including Eudora Pro 3.0)
* MacPGP 2.6.3A fully-customizable, floating toolbarThe application requires MacPGP 2.6.3 and any version of the Eudora email application.
Sincerely,

John L. Loch
johnloch@mtt.com


Export HuperCard stack; exports data from a stack (export-hc.hqx)

Download export-hc.hqx (3,127 KB)


Date: Mon, 06 Mar 1995 11:35:00 -0500 (EST)
From: "Scheck, Andrew E."
Subject: Export HuperCard stack; exports data from a stack

>I inherited a stack of about 2000 records (a name/address mailing list) that
>I need to export to a Word or Excel file.

Here is a SIMPLE stack that may do the trick for you. It prompts for the
stack that you'ld like to export and the export file name. Then scans each
field of each card of the stack and writes out the data. The output format is
simple tab-delimited text for importing into just about anything including
Excel.

Note: This stack assumes that the first card of the stack contains the first
record and then proceeds through to the last card of the stack. If there are
multiple backgrounds the script will have to be modified to be smarter.

Hope this helps.
Andy Scheck
SchecAE1@aplmail.jhuapl.edu


Extension-to-Type mappings; revision 3 (extension-to-type-3.hqx)

Download extension-to-type-3.hqx (11,911 KB)


From: rdhw@cus.cam.ac.uk (Robin D.H. Walker)
Subject: Extension-to-Type mappings; revision 3
Date: Sun, 22 Jan 1995 16:44:47 +0000 (GMT)

Last updated: 1995 Jan 22 Revision 3

Extension to Type Mappings

There are many circumstances where files from alien (non-Mac) file
systems are imported onto a Mac. Usually it is desirable to assign a
Mac file "Type" and "Creator" code to such files, so that they can be
operated upon, or merely viewed, by an appropriate Mac application.
Unless you are prepared to inspect the contents of the file itself and
deduce an appropriate Mac type/creator, the only evidence for the type
of the file is the "filename extension" commonly used in DOS, OS/2, Unix
and other systems. With certain Mac applications, automatic mapping of
filename extensions to Mac type/creator codes can be achieved. A list
of suggested mappings follows.


extractpc1.02 (extract-pc-102.hqx)

Download extract-pc-102.hqx (45,203 KB)


From: Doug Pettit
Subject: extractpc1.02

This is a slightly newer version of extractpc. This file is
for extracting Compact Pro (.cpt) archives on IBMPC machines
running DOS. Give it to your demented friends who use IBMPCs
so they can extract archives created on your Mac!


Extractor 1.21; for Compact Pro files (extractor-121.hqx)

Download extractor-121.hqx (26,316 KB)


Date: Mon, 19 Dec 94 23:34:31 EST
From: DPETTIT@KENTVM.KENT.EDU
Subject: Extractor 1.21; for Compact Pro files

This is a upgrade of the copy in the archive.


FileChop 1.0 (file-chop-10.hqx)

Download file-chop-10.hqx (607,974 KB)


From: bargy@nettaxi.com
Subject: FileChop 1.0


FileChop is a new way to transport applications as well as documents and
other types of files that are too large to send by email, floppy disk,
or zip disk. If you would like to email a 1.6mb program to your friend,
but your ISP will only let you send 1mb attachments, simply chop the
application into a 1mb pieces and email him the pieces to be reassembled
on his end. You can chop a 450mb movie into four 100mb pieces and a 50
mb piece to carry the movie on 5 zip disks. To chop a file, simply
compress the file by any standard method (.sit, .hqx, .bin, or .zip),
choose how large the chopped pieces should be, and chop it! To unchop,
simply choose the chopped pieces in numerical order (1, 2, 3, 4, etc)
then when you have chosen the numbered files, end with choosing the
"fileinfo" file, and the process will end after you choose that file.
You must unchop in this order or the file will not reconfigure properly!
FileChop is freeware, but please email me if you like it.

Please email me at bargy@nettaxi.com to report any bugs or problems with
FileChop.



FnsBorf 1.2.7 (fnsborf-127.hqx)

Download fnsborf-127.hqx (23,341 KB)


From: cjk@flash.net
Subject: FnsBorf 1.2.7


Encrypts any file using a random seed, and decrypts it using the exact same
seed. Very useful if you want to encrypt a file you wish to e-mail a
friend.

New in this version: twice as fast and several times more useful, as it
will encrypt any file, from gifs to applications.


Chris Kartheiser
cjk@flash.net.SPAMOFF
Azimuth Software




Folder Flattener Lite 1.2 (folder-flattener-lite-12.hqx)

Download folder-flattener-lite-12.hqx (551,538 KB)


From: "David C. Oshel"
Subject: Folder Flattener Lite 1.2

Folder Flattener Lite 1.2

Abstract:

Drop a folder on the desktop icon. Folder Flattener will compress and
encipher your folder and all files and subfolders within, creating a
backup file suitable for uploading to Internet storage servers.
Double-clicking the .flat file will restore the entire folder to the
location you select. Does not delete sources unless the Option key is
depressed (normally, a pretty cheerful key.) Small, stable, fast,
secure.

Requires PowerPC, Macintosh OS 7.5 up to 9.2.1. Works fine in the Mac
OS X 10.1.1 "Classic" environment.

Disclaimer:

Freeware. Some assembly required (your codebook, see below).
Absolutely no support. Not responsible! This program may contain
errors, however unlikely, that could damage your file system, your
livelihood, your sanity and/or the last chance of the gods at
Gotterdammerung. Use this program entirely at your own risk and
discretion!

If you lose track of your codebook, or if it is damaged, your .flat
files will be beyond my resources to restore.

History:

Lite v1.2 - 20 Dec 2001, user may now press Esc or Cmd-Period to halt;
improved documentation (you¹re reading it)


Gammasoft Apple II File Decoder (gs-a2decoder.hqx)

Download gs-a2decoder.hqx (110,180 KB)


From: jonrelay@napanet.net
Subject: Gammasoft Apple II File Decoder

This program will let you open files created on an Apple II series
microcomputer. It will let you open text files, BSAVEd text, Lo-Res
graphics, and Hi-Res graphics, and Applesoft program files.

This file requires the Gammasoft Runtime Engine. If you don't have the
Gammasoft Runtime Engine, you can download it from this server or, if you
have MacOS Easy Open enabled, use the HyperCard Player instead.

When you decompress this file, be sure to put it in the same folder as the
Main Menu file. Also put an alias of the Apple //e File Decoder file in the
`Data folder. Make sure the alias doesn't have an " alias" suffix or a
space after it's name.


HC Encrypt 1.0 (hc-encrypt-10.hqx)

Download hc-encrypt-10.hqx (14,620 KB)


From: Haakon Stoedle
Subject: HC Encrypt 1.0

HC Encrypt offers an easy, but secure way of encrypting you files. It supports
keys up to 255 letters, the encryption is case sensitive and file length is only
restricted by memory (RAM).


HQXer 1.0 Docs (rtf format) (hqxer-10-docs.hqx)

Download hqxer-10-docs.hqx (6,403 KB)


Date: Tue, 1 Jun 1993 15:40:17 -0700 (PDT)
From: CAMP5@CSBINA.CSUBAK.EDU
Subject: HQXer 1.0 Docs (rtf format)


The documentation for HQXer was originally distributed in WordPerfect
format. Since that isn't a very widely accepted format, I've decided to send
a version in RTF format. Please, incorporate this RTF file into the original
"HQXer" archive!! If you have already distributed HQXer, don't worry about
resending it or anything, the documentation is the same, except that it's now
in RTF format.
Thanks for your time... I appreciate your help! *Stiles

----------------------------------cut here--------------------------------
(HQXer Docs.RTF.cpt.hqx)

HQXer 1.1 (hqxer-11.hqx)

Download hqxer-11.hqx (50,667 KB)


Date: Sun, 7 Nov 1993 17:28:23 -0800 (PST)
From: John Stiles
Subject: HQXer 1.1



HQXer 1.1: HQXer allows the user to encode and decode BinHex archives
in the most efficient way possible. Utilizing System 7's Drag-and-Drop tech-
nology along with high-speed caching and native 68000 optimization, HQXer
takes BinHex archiving to the limits of the Macintosh itself. HQXer requires
System 6.0.7 or later, and should be given out with every Internet account.
And, it's only $10 shareware! Hope you like it... *Stiles

---- ---- ---- ---- ---- ---- cut here ---- ---- ---- ---- ---- --



iArchive.img.hqx (iarchive.hqx)

Download iarchive.hqx (1,598,479 KB)


From: Jan Bruyndonckx
Subject: iArchive.img.hqx

iArchive by Triptic Design

Archive your valuable documents using affordable internet storage. Storage is provided by FilePool on a redundant array of secure servers.

The iArchive application has powerful filter capabilities to archive exactly the files you want. You can restore a full hard disk, individual files or folder. You can even restore to a previous version of a file.

Apple Help is incorporated in every window.

Storage costs $0.25 per Megabyte. Professional Services (including higher transfer speed and encryption) cost $20 additionally.

Recommended system: any Apple Macintosh with MacOS 9
Minimum system: a Power Macintosh with MacOS 8.6


LHA Expander 1.0.3 (lha-expander-103.hqx)

Download lha-expander-103.hqx (121,325 KB)


From: sekino@phys.wani.osaka-u.ac.jp (Masanori Sekino)
Subject: LHA Expander 1.0.3

LHA Expander is a drag and drop utility for LHA file decompressing.

LHA Expander can handle general LHA archives (.lzh, .lha, lzs),
self extracting archives (.exe, .com, .x) and MacLHA archives
(which was encoded in MacBinary format first, then compressed).

System requirements: System 7.0 or lator

Thanks,

Masanori Sekino
e-mail:

I give permission for my program to be included on the Info-Mac CD-ROM.


LOKI 2.0 Release Version (loki-20.hqx)

Download loki-20.hqx (492,326 KB)


From: "William Opdyke"
Date: Mon, 19 Jun 1995 10:47:14 -0700
Subject: LOKI 2.0 Release Version

Here is the latest release of Loki 2.0 .


Resubmission of Macbinary (mac-binary-101.hqx)

Download mac-binary-101.hqx (27,556 KB)


Date: Thu, 10 Sep 1992 00:26:35 -0700 (PDT)
From: Les Ferch
Subject: Resubmission of Macbinary

Date: Wed, 19 Apr 89 16:44 EDT
From: Greg Smith

This StuffIt archive contains the MacBinary application and a MacWrite
document. Some methods of downloading MacBinary files (FTP to a Mac,
for example) can only download to the data fork of the Macintosh file.
The MacBinary program will translate such data files into their correct
components (info,data,rsrc). There is an Upload feature to translate a
Mac file into a MacBinary data file, suitable for uploading via FTP.

The True MacBinary setting is for the case of catenating the three
pieces of a MacBinary file on unix into one text file prior to
downloading. With some versions of xbin and macget, the resulting forks
on unix are not padded out to the 128 byte blocks that the MacBinary
standard specifies. Turning True MacBinary off will handle this case.
The MacBinary utility will only create True MacBinary II files for
Uploading, regardless of the True MacBinary setting. The Delete after
Download setting will delete the input data file after successfully
translating it to a Macintosh file.

This is version 1.0.1.

Please feel free to post this package on other servers. It's freeware.

+----------------------------+------------------------------------+
| Greg Smith | BITNET: smith@bucknell.bitnet |
| Systems Analyst | smith@bknlvms.bitnet |
| Bucknell Computer Services | INTERNET: smith@bucknell.edu |
| Bucknell University | smith@coral.bucknell.edu |
| Lewisburg, PA 17837 | AT&Tnet: (717) 524-1801 |
+----------------------------+------------------------------------+


util - MacBinary II+ v1.0.1 (mac-binary-ii-plus-101.hqx)

Download mac-binary-ii-plus-101.hqx (25,683 KB)


Date: Wed, 17 Mar 1993 12:40:19 +0800
From: Peter N Lewis
Subject: util - MacBinary II+ v1.0.1


_______________________________________________________________________
Peter N Lewis Ph: +61 9 368 2055
MacBinary II+ is a System 7 drag&drop converter for MacBinary files. It
has no User Interface, simply drop a MacBinary file on it and it will be
decoded, drop any other file or folder on it and it will be encoded.
MacBinary II+ should be fully compatible with all current MacBinary
encoders/decoders, and extends the format to include folder hierarchies
(although no other decoder will be able to decode folder hierarchy
MacBinary files created by MacBinary II+).

Version 1.0.1 corrects a problem that stopped MacBinary II+ from
recognizing MacBinary I files. I don't normally like posting such
a minor change, but since I don't have any grand plans for the program
anyway, and since the problem is fairly noticable, I decided to post
this fixed version.

MacBinary II+ should work on any System 7 Mac. If it doesn't, let me know.

MacBinary II+ is free for any use.

Hope its useful to someone,
Peter.

MacBinary II+ v1.0.1 Copyright 1992-93 Peter N Lewis


MacBinaryOSAX 1.0 (mac-binary-osax-10.hqx)

Download mac-binary-osax-10.hqx (44,395 KB)


From: seanh@unforgettable.com
Subject: MacBinaryOSAX 1.0


MacBinaryOSAX 1.0
written by Sean Hummel


Ever notice that when you look around for 'C' code which encodes/decodes
MacBinary III files. It's hard to find, and certainly it's harder to have to
make it fit into your code. This code is completely free, and may be used
for any purpose.

The OSAX is a simple interface which enables the code to be used via
Applescript. I use it so that I won't have to install Stuffit? from Alladin
on each of my work machines. This also makes scripts easier to write, as
there aren't ever any problems locating StuffIt.

The project file is a CodeWarrior Pro 5 project, so you for those that are
using CWPro4 or earlier, you'll need to create a project.



MacBinHex OSAX 1.1 (mac-binhex-osax-11.hqx)

Download mac-binhex-osax-11.hqx (53,194 KB)


From: seanh@unforgettable.com
Subject: MacBinHex OSAX 1.1


MacBinHex OSAX 1.1
written by Sean Hummel


version 1.1 fixes a bug in the decoder, and improves speed considerably, of
both the encoder and decoder.

Have you ever looked around for some good HQX code so that you could include
creating HQX files in your automated process? Well this is it. While I'll
admit it is not the fastest code in the universe, it is certainly easy to
read, and fairly well documented. As well as being free, this gives you
everything you need to make an HQX program. The code supports both
encoding and decoding, however the encoding DOES NOT do RLE compression, but
the decoder does support decoding RLE compression in the HQX file.

I've included the binhex.txt file, which I used to write my code from. The
OSAX ditributed here, is completely free as well, and may be used for any
purpose. I use it to remove the use of StuffIt? to encode distributables,
from my Applescripts. This makes my Applescripts correctly all the time, as
there are not any problems locating the StuffIt application.



MacCPIO v0.2; a CPIO archive creator utility (mac-cpio-02.hqx)

Download mac-cpio-02.hqx (25,154 KB)


From: "Vince Paragano"
Subject: MacCPIO v0.2; a CPIO archive creator utility
Date: Tue, 15 Mar 1994 14:06:18 -0600



--========================_12745404==_
Content-Type: text/plain; charset="us-ascii"

MacCPIO is a quick and dirty CPIO archive creator utility. The intent was
to write a program for the Mac with a Mac "look and feel" that would
generate a CPIO archive which could then be uncompacted on a Unix machine.
The inspiration behind this was things like SunTAR and the fact that I wanted
to do this at work for archiving lots of Mac source code in a Unix format.
Mostly however, I must confess that it seemed like a nifty little project to
use as a learning example in Mac programming.



--========================_12745404==_
Content-Type: application/mac-binhex40; name="MacCPIO_v0.2.sit"
Content-Disposition: attachment; filename="MacCPIO_v0.2.sit"


MacEncrypt 2.0 (mac-encrypt-20.hqx)

Download mac-encrypt-20.hqx (44,082 KB)


Date: Tue, 11 May 1993 18:36:10 -0500
From: jcstevens@mortimer.atl.ga.us
Subject: MacEncrypt 2.0

MacEncrypt 2.0 is a major upgrade to MacEncrypt 1.01, the drag and drop
encryption program for the Macintosh.

MacEncrypt will allow you to encrypt files using the "Data Encryption
Standard." Encrypted files can only be used if you know the password.
Groups of files can also be encrypted into an encrypted archive.
MacEncrypt can be placed on the desktop next to the trash can and files can
simply be dropped on top of it to be encrypted.

Features added with this release include:

o A single executable that runs on all Macs. Color will be used on color Macs.
o Archives. Multiple files can be archived in a single archive file with a
single password.
o Reusable passwords. Multiple files can be encrypted or decrypted with a
single password. Previous versions required that you retype the password for
each file.
o File shredding. Files encrypted with previous versions of MacEncrypt were
susceptible to viewing with low-level disk editing programs if the encrypted
files were kept on the same disk. "Extra Security" is now an option. This
feature will overwrite the place on disk where the encrypted file used to be
so that it will never be readable by anything.
o Archived items can be left or deleted after archiving.

MacEncrypt is shareware. The shareware fee is $10.00. The program
continues to be supported, developed and improved. Registered users are
informed of free upgrades. Site licenses are also available.

J. Clarke Stevens
1118 Forrest Blvd.
Decatur, GA 30030
jcstevens@mortimer.atl.ga.us

MacGzip_FAT_1.1.1 (mac-gzip-111.hqx)

Download mac-gzip-111.hqx (280,851 KB)


From: MacSPD@ivo.cps.unizar.es
Subject: MacGzip_FAT_1.1.1



MacGzip 1.1.1 FAT


The application which you use to deal with those .gz files.
This version fixes a couple of small bugs in 1.0


When the sunsets glow drifts away from you
You'll no longer know if any of this was really true at all
(The Cure)
J.A. Gutierrez E. | finger spd@daphne.cps.unizar.es for PGP public key




MacLHA 2.21 (mac-lha-221.hqx)

Download mac-lha-221.hqx (160,672 KB)


From: jb5t-mztn@asahi-net.or.jp
Subject: MacLHA 2.21



MacLHA2.21 is the latest version of MacLHA, a freeware archiver. MacLHA
can expand and create LHA format archives. LHA format files usually
have suffix ".lzh". There are LHA archivers which work on MS-DOS,
Windows, and UNIX, so you can use MacLHA to exchange datas from and to
other platforms. This archive contains the archiver itself and Japanese
and English document.





MacPGP Control fc1 (mac-pgp-control-10fc1-as.hqx)

Download mac-pgp-control-10fc1-as.hqx (1,318,478 KB)


From: (Raif S. Naffah) raif@FL.NET.AU
Subject: MacPGP Control fc1

I'm attaching to this message the final client version 1 of MacPGP Control.

MacPGP Control (or MPGPC for short) is an AppleScript(R) application
that offers an easy-to-use, more Macintosh(R) friendly user interface
to Philip Zimmermann's PGP software ãMacPGP(R).

MacPGP Control relies on your AppleScript-aware version of MacPGP to
perform encryption and decryption. It is a US$15 shareware.

The main features of MPGPC are:

*** MacPGP related features
+ Compatible with all known scriptable versions of MacPGP including
the MIT versions and the MacPGP 2.6.3i.
+ Keypair generation of any allowed (by MacPGP) length up to 2048-bit.
+ Update of PGP public key information of user keyring members through
TCP/IP connection.
+ Definition and use of nicknames for Users and Groups recipients.
+ More user control for keyring related actions, through a true
Macintosh Human Interface and ãin some casesã direct manipulation of
keyring file data, including: editing trust flag byte,
enabling/disabling, extracting, checking, certifying, fingerprinting,
and forcing Warn-Only bits.
+ More user control for PGP and conventionally encrypting text and
binary files. When PGP encrypting file, users can designate more than
one recipient.
+ Secure clean clear-signed PGP ciphers, through the implementation of
features such as: expanding tabs, transliterating non-USASCII
characters, and word-wrapping lines before processing and handing over
to email application.
+ Viewing of PGP packets for educational and debugging purposes.
+ Opaque signing (asciified clear-signed text)
+ Transparent use of user's UserIDs found in his/her secret keyring file.
+ Encryption to multiple recipients.
+ Generation of Key Revocation Certificates.

*** Macintosh related features
+ Encryption of voice messages recorded by Mac sound input devices.
+ Easy to use, point-and-click Macintosh User Interface.
+ Extensive support of drag-and-drop.
+ Documented handlers calls for use by other scriptors.

Raif S. Naffah
Type & Graphics Pty Limited (ACN 061 642 779)


MacPGP Kit 1.7.1 (mac-pgp-kit-171-as.hqx)

Download mac-pgp-kit-171-as.hqx (1,294,479 KB)


From: grgcombs@mail.utexas.edu (Gregory S. Combs)
Subject: MacPGP Kit 1.7.1

MacPGP Kit works with MacPGP (not included), it is a set of AppleScripts
that ease many of the troublesome/trivial functions of MacPGP.

You can encrypt/decrypt/sign/verify any file/document and it even includes
the Eudora-PGP scripts which make encrypting/signing/decrypting/verifying
your email as easy as only one click of the mouse.

The new version fixes several bugs. One of which prevented the use of the
Eudora-PGP scripts with Eudora 1.5.3 and Eudora 2.1.3 ... this has been
fixed. Also in version 1.7 of the kit, signing from eudora was not working
properly. This also has been fixed.

The MacPGP is a product of myself and the efforts of the Macintosh
Cryptography Interface Project mailing list. For more information on this
product and MCIP in general, visit


If you like this product, please contribute to the Phil Zimmerman Defense Fund:

We would like to point out that, though Phil Dubois and a number of other
lawyers are providing their legal services to Phil Zimmermann pro bono,
there are many costs not covered by that. If you're interested in helping
out, contact:

Philip Dubois
2305 Broadway
Boulder, CO USA 80304
(Phone #: 303-444-3885)

(Make checks payable to Phil Dubois, marked for the Phil Zimmermann defense
fund)

Gregory S. Combs


MacROT13--a rot13 translator for Macintosh (mac-rot13.hqx)

Download mac-rot13.hqx (4,731 KB)


From: John Stiles
Subject: MacROT13--a rot13 translator for Macintosh
Date: Wed, 23 Mar 1994 20:35:08 -0800 (PST)


MacToVax -- a hyperCard 2.1 stack which will convert and MSWord fast (mac-to-vax-hc.hqx)

Download mac-to-vax-hc.hqx (73,136 KB)


Date: Mon, 01 Nov 1993 13:13:37 -0500 (CDT)
From: GG4921S@ACAD.DRAKE.EDU
Subject: MacToVax -- a hyperCard 2.1 stack which will convert and MSWord fast

To: info-mac@sumex-aim.stanford.edu
Message-Id: <01H4SWBDQTUA00HF9A@ACAD.DRAKE.EDU>
X-Vms-To: IN%"info-mac@sumex-aim.stanford.edu"
Mime-Version: 1.0
Content-Transfer-Encoding: 7BIT
Resent-To: backmod
Resent-Date: Mon, 1 Nov 1993 18:39:34 PST
Resent-From: Info-Mac Moderator


MacUnRAR (mac-unrar-11.hqx)

Download mac-unrar-11.hqx (108,437 KB)


From: dufay@inforoute.cgs.fr
Subject: MacUnRAR


MacUnRAR Fat v1.1, freeware, the first RAR archives extractor for the
Macintosh.
Based upon Eugene Roshal code (author of RAR and Unrar for PC and UNIX)
with its authorization.


Guillaume Dufay

dufay@inforoute.cgs.fr




Macuucode 1.05 (mac-uucode-105.hqx)

Download mac-uucode-105.hqx (28,084 KB)


Date: Fri, 27 Jan 95 18:44:14 EST
From: DPETTIT@KENTVM.KENT.EDU
Subject: Macuucode 1.05

Much better than UUtool but not as powerful as UULite. However it is freeware
and provides the ability to add/strip linefeeds needed by some pc systems and
programs.

Douglas Pettit.....


MacZip 1.04 final (mac-zip-104.hqx)

Download mac-zip-104.hqx (394,174 KB)


From: Dirk Haase
Subject: MacZip 1.04 final


MacZip is a cross-platform compatible tool and
includes both Zip (for compression) and Unzip (for extraction).

zip is a compression and file packaging utility for Unix,
VMS, MSDOS, OS/2, Windows NT, Minix, Atari and Macintosh,
Amiga and Acorn RISC OS.

Unzip unpacks zip archives.
The zip and unzip programs can work with archives pro-
duced by PKZIP, and PKZIP and PKUNZIP can work with
archives produced by zip. zip version 2.2 is compatible
with PKZIP 2.04.

This port supports also Apple-event.So you can install it in your
WWW-Browser as a helper-app. A additional apple event "do_cmd"
gives you the full power of command-line invocation via
applescript.

If you have any problems/questions don't hesitate
and send a email to me.


Most important / features are:

The complete set of macintosh finder-info is stored:
FXinfo, Mac-Pathname, file-dates and Finder-Comments
are now stored.

It's possible to encrypt/decrypt archives.



System requirements:
MacZip requires at least System 7 and a Macintosh with a minimum of a
Motorola 68020 or PowerPC 601 processor. Other configurations may work
but it is not tested at all.

The application is distributed as a fat binary with both regular 68K
and native PowerPC versions included.

For more information visit my
Web page:
Homepage: http://www.sitec.net/maczip/



MacBzip 0.0b0 (macbzip2-00b0.hqx)

Download macbzip2-00b0.hqx (256,848 KB)


From: MacSPD@ivo.cps.unizar.es
Subject: MacBzip 0.0b0


This is the first release of MacBzip2, the bzip2 compressor ported to
MacOS (along with the source code, as required by GPL)

You can include it on any CD-ROM w/o asking for permission first
according to GNU General Public License; but it will be nice of yours
if you let me know it...

For more information see

http://www.muraroa.demon.co.uk/ (bzip2 Home Page)
http://persephone.cps.unizar.es/~spd/gzip/ (MacBzip2 Home Page)

This is a beta release, so you should check it works for you before
deleting compressed files!




MacBzip 0.0b0 (macbzip2-0b0-src-c.hqx)

Download macbzip2-0b0-src-c.hqx (806,478 KB)


From: MacSPD@ivo.cps.unizar.es
Subject: MacBzip 0.0b0


This is the first release of MacBzip2, the bzip2 compressor ported to
MacOS (along with the source code, as required by GPL)

You can include it on any CD-ROM w/o asking for permission first
according to GNU General Public License; but it will be nice of yours
if you let me know it...

For more information see

http://www.muraroa.demon.co.uk/ (bzip2 Home Page)
http://persephone.cps.unizar.es/~spd/gzip/ (MacBzip2 Home Page)

This is a beta release, so you should check it works for you before
deleting compressed files!



Matlab_MacGzip_Scripts.sea (macgzip.hqx)

Download macgzip.hqx (6,509 KB)


From: jslater@cs.wright.edu
Subject: Matlab_MacGzip_Scripts.sea


The MacGzip package provides four files: the M-Files gunzip.m
and gzip.m, and the AppleScripts gzip and mat2front.
They are used to gzip and un-gzip files using MacGzip,
the Macintosh version of gzip. MacGzip can be obtained
from a number archive sites, including:
http://hyperarchive.lcs.mit.edu/HyperArchive.html

Examples of usage are given in the M-Files.

This may be freely distributed as is.

Joseph C. Slater
jslater@cs.wright.edu



MacRAR 2.0.1, the RAR compressor for the Mac (macrar-201.hqx)

Download macrar-201.hqx (555,733 KB)


From: dufay@capway.com
Subject: MacRAR 2.0.1, the RAR compressor for the Mac


MacRAR is a RAR archiver for the Macintosh (RAR is a common compression
format coming from PC with attractive compression rates and options). It
allows to extract RAR archives or compress files (including Mac files using
MacBinary III).

MacRAR uses a modern Mac interface (Appearance Manager, Navigation
Services, AppleScript, Drag'n Drop,...) but remains compatible with old Mac
(newer than Mac SE) or System (greater than 7.0).

The RAR implementation (i.e. MacRAR) is a freeware, however it uses RAR
compression RAR which is a shareware. Then you should register MacRAR to
http://www.rarsoft.com (it uses the same registration codes as WinRAR) in
order to get all RAR options.

A French version is also available at MacRAR home page
http://www.capway.com/dufay



This program can be be included on the commercially available CD-ROM of the
archives and would fit very well in info-mac/_Compress_&_Translate/



Guillaume Dufay



MacZip final version 1.01 (maczip-10.hqx)

Download maczip-10.hqx (629,571 KB)


From: d_haase@sitec.de
Subject: MacZip final version 1.01


MacZip is a cross-platform compatible tool and
includes both Zip (for compression) and Unzip (for extraction).

zip is a compression and file packaging utility for Unix,
VMS, MSDOS, OS/2, Windows NT, Minix, Atari and Macintosh,
Amiga and Acorn RISC OS.

Unzip unpacks zip archives.
The zip and unzip programs can work with archives pro-
duced by PKZIP, and PKZIP and PKUNZIP can work with
archives produced by zip. zip version 2.2 is compatible
with PKZIP 2.04.

This port supports also Apple-event.So you can install it in your
WWW-Browser as a helper-app. A additional apple event "do_cmd"
gives you the full power of command-line invocation via
applescript.

Binaries/Sources can be also found at:
http://www.sitec.net/maczip/download/
MacZip101c.hqx -> crypt version
MacZip101nc.hqx -> non crypt version
Size: 610Kbyte

If you have any problems/questions don't hesitate
and send a email to me.


Most important / features are:

The complete set of macintosh finder-info is stored:
FXinfo, Mac-Pathname, file-dates and Finder-Comments
are now stored.

It's possible to encrypt/decrypt archives.



System requirements:
MacZip requires at least System 7 and a Macintosh with a minimum of a
Motorola 68020 or PowerPC 601 processor. Other configurations may work
but it is not tested at all.

The application is distributed as a fat binary with both regular 68K
and native PowerPC versions included.

For more information visit my
Web page:
Homepage: http://www.sitec.net/maczip/



Thanks,

Cheers Dirk Haase
d_haase@sitec.de



(maczoo-21.hqx)

Download maczoo-21.hqx (85,553 KB)


From: Murph Sewall

I've seen a couple of reports that the MacBooz .zoo file extractor
doesn't always produce good files. Here's an alternative, that also has
some limitations but may work better (It's 50K bytes larger, so it
should do more, yes?). I haven't had an occasion to use either program,
so I can't say whether either works or not.

SPECIAL INSTRUCTIONS FOR MacZOO 2.1

1/7/92

The interface to MacZOO is a command line interface -- sorry, but
we wanted to modify a minimum amount of the code written by ZOO's
creator, Rahul Dhesi. After double clicking on the MacZOO icon,
type in the command line arguments as described in ZOO.MAN. For
example, if on a UNIX or MS-DOS command line you would type "zoo
a temp *.c" (which would add all files with names ending in ".c"
to a ZOO archive called "temp.zoo"), you would enter "a temp *.c"
in the MacZOO startup window.

Also, MacZOO will not archive and compress anything but text files.
Executable files on the Mac, for example, are not single files like
they are on most other systems, and so ZOO would have to be
extensively modified to handle them.

Thus, MacZOO is intended as a program to handle archives of text
files which will be transferred among various machines. Since ZOO
runs on UNIX machines, OS/2 machines, NeXTs, Amigas, Ataris, and
MS-DOS machines, Macs can now handle ZOO files created by these
machines and vice versa. Even Apple II's and CP/M machines have
unZOO programs.

ZOO 2.1 was ported to the Mac by Jim Wolff and Brooke Anderson,
who assume no responsibility for the results of using MacZOO --
even if it causes your computer to explode, killing everyone within
a several block radius.


mailto:QuicKeys (mailto-quickey-set.hqx)

Download mailto-quickey-set.hqx (7,361 KB)


From: (Michael C. Zastrow) michaelz@awbbs.com
Subject: mailto:QuicKeys

This mailto: information unscrambler for html-forms requires QuicKeys and
Tex-Edit Plus. With this QuicKey it is one keystroke simple to format and
unscramble the information returned by web page forms utilizing the
"mailto" html tag.

* Seeing Specially Graphics * http://www.awbbs.com/michaelz/


MIMEconvert 1.07 (mime-convert-107.hqx)

Download mime-convert-107.hqx (874,025 KB)


From: zac
Subject: MIMEconvert 1.07

A long overdue update to MIMEconvert.

The new version has two main changes

Version History

1.07
Added drag and drop to text window
Added Append to Same File command

You can now drag text files to the text field in MIMEconvert to llow for
quick and easy conversion. As well you can now repeatedly append data to
a file once you have already selected it with the Append command

What does it do?

MIMEconvert will:

remove MIME "mail" characters; the "+" and "&" symbols
convert hex encoded characters
save converted text to new files
append converted text to existing files
remove Submit, Reset or any other tag you specify
convert to tab delineated or any other form of single character
delineation

As usual MIMEconvert is free of charge

email: zac@pixelgeek.com
WWW: http://www.pixelgeek.com/


MooMooEncode 1.7! (moo-moo-encode-17.hqx)

Download moo-moo-encode-17.hqx (128,396 KB)


From: David Shaw
Subject: MooMooEncode 1.7!
Date: Wed, 5 Apr 95 19:42:41 EDT

Well, it's been a long time in coming, but here is the brand new version
1.7 of MooMooEncode, the Text-to-Cow Talk program!

MooMooEncode is an amazingly useful program that lets you translate
regular text files into moos and back again. If you like, you can
Bovinifize your text, and have it come out with a "cowish accent" as if
a cow had spoken it.

This version adds support for Apple's Thread Manager so you can cow-ify
many files simultaneously, dragging and dropping of files onto the
MooMooEncode icon, Apple Events, AppleScripting, shaping the output into
a big ASCII graphic of a cow.... and that's only the tip of the iceberg.

If you like cows, this is a program for you!

If you like the program, be sure to visit the MooMooEncode page on the web:
http://hertz.njit.edu/~dms1070/moomooencode

Enjoy !

David Shaw
http://hertz.njit.edu/~dms1070


(mpack-15.hqx)

Download mpack-15.hqx (80,045 KB)



(naff.hqx)

Download naff.hqx (12,839 KB)


Date: 30 Jul 1993 16:24 +0100 (CET)
From: Christopher Garland CEC EUROTRA


***********************
Not Another File Filter - a comms/multi-OS environment utility.
***********************



NAFF is a no-frills, quick-and-dirty utility for converting between Mac,
Dos and Unix text file formats. Just drag the file(s) you wish to convert
over the NAFF icon, select the conversion required and the characters to
be added to construct the output file name(s) and let it go....

NAFF runs in the background under System 7 (which it requires), but in
any case is reasonably fast, so it should not often need to be
backgrounded, unless you have very large, or very many files to convert.
Double-clicking the NAFF icon will present an input file selection box
immediately for conversion of a single file.

Output files are in MacWrite text file format, still the lowest common
denominator format and readable by any text editor/word processor.

This program is free. Distribute it as you like, but only with this
documentation.

I've discovered that it has made its way across the Atlantic
by itself, and since the earliest version I released was
flawed I wanted to make sure the corrected one was the one
people could get hold of.

So here is the corrected NAFF.

Read file NAFFS7.HQX


NoComment 1.0 (Fat) (no-comment-10.hqx)

Download no-comment-10.hqx (15,769 KB)


From: desimon@CLI.DI.Unipi.IT (Gabriele de Simone)
Subject: NoComment 1.0 (Fat)

NoComment is a simple Drag&Drop application that removes StuffIt
comments from any StuffIt archive you drag over its icon (or open
through the åRemove comments...¼ command under the åFile¼ menu).
NoComment is a FAT application, and it runs on any Macintosh or Power
Macintosh with System 7.


[*] Now Compress Expander 1.0.1 (now-compress-expander-101.hqx)

Download now-compress-expander-101.hqx (120,498 KB)


From: yanjose@sfsuvax1.sfsu.edu (Joe Yan)
Subject: [*] Now Compress Expander 1.0.1
Date: Sun, 7 Nov 93 12:03:03 PST

Hello,

Here is version 1.0.1 of Now Compress's expander program, for decompressing
archives compressed by Now Compress. This is to replace version 1.0.

yanjose@sfsuvax1.sfsu.edu

Pacifist 1.6 (pacifist-16.hqx)

Download pacifist-16.hqx (1,061,750 KB)


From: support@charlessoft.com
Subject: Pacifist 1.6


Pacifist 1.6 is a shareware application that opens Mac OS X .pkg
package files and allows you to extract individual files and folders
out of them. This is useful, for instance, if an application which is
installed by the operating system becomes damaged and needs to be
reinstalled without the hassle of reinstalling all of Mac OS X (for
example, if you had accidentally deleted Sherlock and wanted to
reinstall it, but not the whole operating system). Pacifist is also
able to verify existing installations and find missing or altered
files*, and also has the ability to optimize your system's performance
by updating prebinding information on your hard disk.

*This product includes software developed by the University of
California, Berkeley and its contributors.

Changes in this version:

- Compatibility with Mac OS X 10.3 (Panther) and its packages

- Fixed some minor interface flaws

- Small performance increases

- Made the verify feature check the file size if the package does not
specify a checksum

- Fixed some bugs in extracting identical files from a package

- Loading a package is now done in a separate thread

- It is now possible to cancel loading of a package

- Fixed a spurious disk-full error

- Pacifist now notifies the Finder when it installs a file so that it
will update immediately

- Pacifist is now much smarter about dealing with situations when it is
asked to extract files from a package on a disk that is no longer
inserted



Pict2Pict (utility) (pict-to-pict.hqx)

Download pict-to-pict.hqx (10,511 KB)


From: ingemar@lysator.liu.se
Date: Sat, 22 Oct 1994 19:46:46 +0100
Subject: Pict2Pict (utility)


This program is similar to PictResUtils by Roland Gustavsson. I needed to
do just what that program did, move PICTs between resources and the single-
file format, but had no access to the existing program at the time.

Pict2Pict supports drag-and-drop, should work under System 6 as well as 7.
It uses temporary memory when needed, so its own partition size is minimal.

When you open files with Pict2Pict, each PICT is displayed, so you can choose
whether to save it or skip it, or save all.

Freeware, by Ingemar Ragnemalm 1994.


pkzip-203 (pkzip-203.hqx)

Download pkzip-203.hqx (155,385 KB)


From: brad@asizip.com
Subject: pkzip-203


PKZIP Mac is an advanced data compression program for Macintosh
systems running System 7 or higher. PKZIP Mac is compatible
across many computer platforms, allowing you to transfer zipped files
from one computer to another.

While powerful, PKZIP Mac is easy to use. You can customize PKZIP Mac's
settings with a variety of options. For example: use a faster
compression method for speedier operations, use a higher compression
ratio to save the most disk space, or use passwords to prevent
unauthorized access to your most sensitive files.

PKZIP Mac is a program for compressing data files. Compressed files take
up less disk space. Compressed files are stored in a single Zip Archive.
You could think of a Zip Archive file as an envelope for files. When a
file is compressed, a copy of the file is placed into the Zip Archive.
Putting files in a Zip Archive makes your file lists less confusing.
Many files can be included in one Zip Archive.




[*] Privacy and Encryption Paper (privacy-encryption.hqx)

Download privacy-encryption.hqx (65,791 KB)


Date: Wed, 05 May 1993 12:37:22 EDT
From: "Paul D. Bain"
Subject: [*] Privacy and Encryption Paper

This is a paper I recently wrote for a legal seminar on Computers and the Law.
The paper is entitled, "A Question of Informational Privacy: The Public
Policies of Computer Encryption." The paper discusses: the relationship
between the individual and the state; the evolution of a right to informational
privacy from a general right to privacy; informational privacy and policing
interests in computers; and computer encryption technologies--private-key (DES)
and public-key (RSA) cryptography. The paper then applies the relevant public
interests to computer encryption technologies.

This is a Postcard file; it is a self-standing, read-only file and no
application is necessary to read the file.

(This BinHex file created by DownLine 1.1)


No Subject! (privacy-for-pals-15.hqx)

Download privacy-for-pals-15.hqx (89,557 KB)


From: bavogler@katya.acs.ilstu.edu (Benjamin A. Vogler)
Subject: No Subject!
Date: Tue, 21 Dec 93 16:41:30 CST

--Use name: Privacy-for-Pals-15.hqx

Privacy for Pals v1.5
by Matthew Koglin
(c) 1993 PalWare, Ltd.

PFP is an encryption system. It's former program, version 1, is
replaced by a faster and better system. Version 1.5 adds:

- 200% speed encryption
- 150% speed decryption
- Better Encryption (Harder to Decrypt)
- Changing File Types of Encrypted Software
- More User Friendly

PFP is $3-$5 shareware.

-----


PUP decrypter (pup-decryptor-20.hqx)

Download pup-decryptor-20.hqx (16,132 KB)


Date: Wed, 3 Nov 1993 00:40:32 -0600
From: c526142@monad.missouri.edu (Kuang-Yu Liu)
Subject: PUP decrypter



--========================_8791030==_
Content-Type: text/plain; charset="us-ascii"

Hi,

Here is PUP decrypter Version 2.0. Strange! Every once in a while somebody
come up with this question.

Goo luck.




--========================_8791030==_
Content-Type: application/mac-binhex40; name="PUP=_Decryptor_v2.0.sit"


QIM 1.2.4 FAT;Installer builder, compression and encoding utility. (qim-124-fat.hqx)

Download qim-124-fat.hqx (644,078 KB)


From: yellowsoft@kagi.com
Subject: QIM 1.2.4 FAT;Installer builder, compression and encoding utility.


QIM allows you to create straightforward an installer for distributing any
kind of file. You can build your own 68k, PPC or FAT installer application
in a very simple way, choosing many features such as: compression, target
processor, computer restarting, destination folder. The Built Installer can
show your own logo in its main window as well as a scrolling styled "Read
Me" text in its splash screen and also a scrolling styled help text. Both
texts may have embedded Picts.
QIM is able to build single self-extracting installers and installers using
external documents, for distributing your creations by using the media you
want.
Even if you will never create an installer, QIM will be anyway useful:
becoming the archiving application of your choice, since any single
QIMDocument (QIMD) holds compressed items without limits.
QIM can also create compressed archives, BinHex and MacBinary files for a
more convenient, free, world distribution. Last, but not least, QIM can
create SEA applications.

QIM is shareware, it costs less than a small utility and anyone should
afford it.
QIM requires at least System 7 to run.
QIM is Internet Config, Drag Manager and Navigation Manager aware moreover
it's Appearance savvy. Balloons available.

Why to say more about QIM? Any technical analysis would be very prosy:
you'd better try it.

Author: Rocco Moliterno
mailto:feedback.yellowsoft@iol.it
http://yellowsoft.tsx.org
QIM page:
http://www.geocities.com/SiliconValley/Network/7162/quickinstaller.html


What's new in 1.2.4 version
-Bug, in Navigation code, fixed.
-Code optimized for better performances.
-Improved Internet menu.
-Bug, in Internet Menu, fixed.
-Addresses update.
-Removed registration form from About Box.
-Added Registrations folder.
-Added Support folder.
-Minor changes.



QIMExtractor 1.2.2 FAT; Extract from QIM documents, binhex and (qim-extractor-122.hqx)

Download qim-extractor-122.hqx (157,695 KB)


From: yellowsoft@geocities.com
Subject: QIMExtractor 1.2.2 FAT; Extract from QIM documents, binhex and


QIMExtractor is an application to extract files from: QIM compressed
archive and QIMDocuments. Also it decode Binhex and MacBinary files.
QIMExtractor is Internet Config aware, Appearance savvy and requires at
least System 7 to run.
It can be freely distributed without limits from anyone: it's FREEWARE .

Author: Rocco Moliterno
mailto:yellowsoft@geocities.com
http://www.geocities.com/SiliconValley/Network/7162/

New since version 1.0.1:
Added MacBinary support. Better error checking. Better disk space checking.
Better low memory checking. Better template files management.
Compression/decompression break. Progress bars. Revisited and changed lot
of code. Linked with MoreFiles 1.4.8. Linked with Internet Config API 1.4.
Internet menu. AppleScript support. Updated e-mail address. Updated web
site address. Removed useless wait windows. Sinchronized version number
with QIM.



QuickConverter 1.5; converts from Quicken data to tab delimited (quick-converter-15.hqx)

Download quick-converter-15.hqx (45,679 KB)


Date: Thu, 20 Oct 1994 14:24:31 -0500
From: d.veldhuizen@genie.geis.com
Subject: QuickConverter 1.5; converts from Quicken data to tab delimited



--========================_12661029==_
Content-Type: text/plain; charset="us-ascii"

QuickConverter 1.5 is a small drag-and-drop utility that converts
data exported from a Quicken (tm) register to tab-delimited text
for use in spreadsheets and databases. Complete instructions in
Read Me file in archive. Freeware.



--========================_12661029==_
Content-Type: application/mac-binhex40; name="QuickConverter.sit"
Content-Disposition: attachment; filename="QuickConverter.sit"


QuickEncrypt 3.0.3; a flexible and secure encryption utility. (quick-encrypt-303.hqx)

Download quick-encrypt-303.hqx (478,703 KB)


From: info@dejal.co.nz
Subject: QuickEncrypt 3.0.3; a flexible and secure encryption utility.


QuickEncrypt 3.0.3


Release 9; by David Sinclair.

Drop a file on this application to quickly and securely encrypt it, or
decrypt previously encrypted files. It supports two encryption formats;
the original, and a new text-based one. Supports self-decrypting archives,
so you can send encrypted data to another user without them needing to have
QuickEncrypt.

It is very configurable and has many features, including support for files
of an unlimited length, multiple worksets, user-controlled password
limitations, default passwords, automatic encryption and/or decryption,
verification of validity, the option of a standard source folder and
various destination options, opening files once decrypted (via
AppleEvents), and more.

Shareware, US$25. You can register via e-mail using your credit card:
or .

The latest version can be obtained from the Dejal Userware web pages:



Requires Mac OS 7.0 or later; compatible with Mac OS 8.

QuickEncrypt 3.0.3 fixes two rare but important bugs:

o Traced and fixed bug where the validity checksum wasn't being
generated correctly, due to an obscure bug in a mathematical
function of development environment. (Specifically, Abs(-128)
was returning -128 instead of 128 as it should.) Thanks to
Jean-Luc Warin and Paolo Matteucci for reporting this bug.

o Fixed bug where an archive would be reported as incomplete when
a folder containing an encrypted file as the last item processed
is encrypted. Thanks to W. Pasman for reporting this bug.





RIPEM Mac 0.8b2 (ripem-mac-08b2.hqx)

Download ripem-mac-08b2.hqx (186,185 KB)


Date: Tue, 6 Jul 1993 09:31:50 -0400
From: kkirksey@world.std.com (Ken B Kirksey)
Subject: RIPEM Mac 0.8b2



RIPEM Mac 0.8b2 Announcement

Raymond Lau

June 23, 1993

This prerelease version of RIPEM Mac is available for public beta testing.

RIPEM Mac is a public key based cryptosystem aimed at providing privacy
and authentication capabilities for email users. RIPEM Mac offers encryption
(for privacy) and authentication (or digital signatures for origin
verification) using a hybrid RSA/DES approach as specified by the Internet
Privacy Enhanced Mail (PEM) standard. Also supported is an extended triple
DES encryption mode for extra security.

RIPEM Mac is compatible with the emerging Internet PEM standard, including
support for public key certificates providing interoperability with various
PEM implementations such as TIS/PEM and COST PEM available for many
platforms.

RIPEM Mac supports direct encryption/decryption from within BBEdit via BBEdit
extensions and from within most text editors and mailer programs via QuicKeys
and the clipboard. Although oriented towards the protection of electronic
mail, RIPEM Mac supports file encryption as well.

RIPEM Mac is format compatible with Mark Riordan's RIPEM, providing
cross-platform compatibility with many UNIX platforms (incl. SunOS, HP/UX,
NeXTStep, AIX, ULTRIX, Mach, Convex) and MS-DOS platforms for which RIPEM is
available.

RIPEM Mac is licensed to you free of charge for non-commercial purposes.
Please see the license agreement included for the full terms of the license.



rp-converter-11-hc.hqx (rp-converter-11-hc.hqx)

Download rp-converter-11-hc.hqx (10,834 KB)


Date: Tue, 22 Nov 1994 14:54:07 -0200
From: bill@quadra220.humana.univ-nantes.fr (Cyril Moulard)
Subject: rp-converter-11-hc.hqx


rtf-to-tex-101.hqx (rtf-to-tex-101.hqx)

Download rtf-to-tex-101.hqx (138,100 KB)


Date: Mon, 12 Jul 1993 11:10:23 +1000
From: brianj@hydra.maths.unsw.edu.au
Subject: rtf-to-tex-101.hqx


This is the latest version of a stuffed and binhexed utility application for
converting Microsoft Word RTF files, including most formula codes,
into Plain TeX files.

It is almost *certain* that editing the converted document
will be necessary to produce a TEXT file that can be read with a TeX
processor, however, this utility should take some pain out of converting
a technical Word document to TeX (especially mathematics).

* Runs under System 6 or 7
* Does batch processing
* Conversion tables in dialog resources (Is this a "feature"?)

Included is a document file written in Microsoft Word and a "before" and
"after" file. I have also included the end result of conversion with
rtf2tex, a public domain Unix version, which apparently is designed with a
different task in mind.

Updates:
1) New paragraph inserted at least every 500 characters, so long text files
should
not choke OzTeX.
2) Object and Pict code simply deleted.

Comments and bugs to:

Brian Jefferies
School of Mathematics
University of New South Wales
PO Box 1, Kensington, NSW 2032
AUSTRALIA brianj@hydra.maths.unsw.edu.au
Date: Fri, 4 Dec 92 14:09:15 +1100
From: brianj@hydra.maths.unsw.EDU.AU
Subject: -v

This is a stuffed and binhexed utility application for
converting Microsoft Word RTF files, including most formula codes,
into Plain TeX files.

It is almost *certain* that editing the converted document
will be necessary to produce a TEXT file that can be read with a TeX
processor, however, this utility should take some pain out of converting
a technical Word document to TeX (especially mathematics).

* Runs under System 6 or 7
* Does batch processing
* Conversion tables in dialog resources (Is this a "feature"?)

Included is a document file written in Microsoft Word and a "before" and
"after" file. I have also included the end result of conversion with
rtf2tex, a public domain Unix version, which apparently is designed with a
different task in mind.

Comments and bugs to:

Brian Jefferies
School of Mathematics
University of New South Wales
PO Box 1, Kensington, NSW 2032
AUSTRALIA brianj@hydra.maths.unsw.edu.au

---Cut Here--

Scrambled Eggs ver. 1.1 Encryption Software (scrambled-eggs-11.hqx)

Download scrambled-eggs-11.hqx (104,964 KB)


From: (Brent A. Carey) btcarey@primenet.com
Subject: Scrambled Eggs ver. 1.1 Encryption Software

This is version 1.1 of Scrambled Eggs and encryption program from Primitive Software. Scrambled Eggs uses an encryption scheme that was originally developed by the author for handling sensitive data for U.S. governmental agencies working with international and domestic intelligence.

Scrambled Eggs employs this algorithm in a simple, easy-to-use interface to provide superior file encryption for the average user. The application is streamlined to greatly speed and simplify the encryption and decryption of any Macintosh file while maintaining a very high level of security.

Includes cool Primitive Pete icons. Ugh!

Requires any PowerPC.

Shareware - $10 (see documentation)


set-aux-binary sets ty/cr to 'BIN '/'A/UX' (set-aux-binary.hqx)

Download set-aux-binary.hqx (6,517 KB)


From: johnston@me.udel.edu (Bill Johnston)
Subject: set-aux-binary sets ty/cr to 'BIN '/'A/UX'
Date: Wed, 30 Mar 94 23:59:09 EST

set-aux-binary is a freely redistributable utility that
sets the type and creator of input files to 'BIN '/'A/UX'.
This permits binary files downloaded to a Mac partition
to be copied to an A/UX unix partition without invoking
A/UX's automatic carriage-return-to-newlines conversion,
which can cause file corruption.

usage: in the System 7.x Finder, drag-and-drop icon(s)
representing unix binary file(s) onto the set-aux-binary icon.

set-aux-binary is based on ctc 1.2 by Brian Bechtel,
with minor changes: its TextEdit boxes for user input
default to 'BIN '/'A/UX', which saves keystrokes, and
it touches the parent folder to update the Finder icons.

Note that set-aux-binary won't repair a binary file that
has been mistakenly downloaded in ascii mode to a MacOS
partition. In such cases, see the A/UX FAQ, available
on jagubox.gsfc.nasa.gov in /pub/aux, for detailed
instructions and try, try again ...

- Bill (johnston@me.udel.edu)


[*] Bill Goodman's SIT-CPT version 1.10 (sit-cpt-110.hqx)

Download sit-cpt-110.hqx (25,386 KB)


Date: Mon, 15 Jul 91 10:51:04 EST
From: Murph Sewall
Organization: Connecticut's Business School
Subject: [*] Bill Goodman's SIT-CPT version 1.10

Version 1.10 of Bill Goodman's StuffIT 1.5.1 archive to Compact Pro archive
converter. System 7 compatible (batch drag and drop, etc.).


SitExpand 1.00 (sit-expand-101.hqx)

Download sit-expand-101.hqx (32,074 KB)


Date: Sat, 19 Jan 91 11:52:52 EST
From: phssra@emoryu1.cc.emory.edu (Scott R. Anderson)
Subject: SitExpand 1.00

SitExpand 1.01 is a freeware utility to decompress StuffIt 1.5.1 archives
(those with file type SIT! -- it doesn't work with the SITD files produced by
StuffIt Deluxe and StuffIt Classic). It is written by Bill Goodman, the author
of Compactor. It has the same creator type as StuffIt, which allows it to
automatically open when such an archive is double-clicked (but it should then
only be used if you *don't* have StuffIt, which is a shareware product).

This program is small enough to run in 512K of memory, but if you don't have
the Hierarchical File System (HFS), you will need to install the HD20 INIT in
your System folder. This can usually be obtained from Macintosh user groups or
>From on-line services such as Compuserve.

*
* ** Scott Robert Anderson gatech!emoryu1!phssra
* * * ** phssra@unix.cc.emory.edu phssra@emoryu1.bitnet
* * * * * **
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


SmartZip 1.0.1 (smart-zip-101.hqx)

Download smart-zip-101.hqx (380,274 KB)


From: marco@spiderlink.it
Subject: SmartZip 1.0.1


SmartZip: "the most powerful and easy to use ZIP compressor for the MacOS".

SmartZip is a MacOS application designed to be the simplest and most
efficient way to manage ZIP files. You can automatically compress
files (or entire folders) by dragging them onto SmartZip and in the
same way you can easily expand ZIP files.
SmartZip is fully compatible with WinZip for Windows and it is
designed to save ALL the unique MacOS information about Macintosh
files and folders, so the integrity of the MacOS files are preserved
when the ZIP file is managed by a PC computer.

Marco Bambini
Vampire Software
http://www.vampiresoft.com



Space Saver Update 5.0.1 (space-saver-update-501.hqx)

Download space-saver-update-501.hqx (184,587 KB)


From: Peter Thomas
Subject: Space Saver Update 5.0.1


This installation will update the ~StuffIt SpaceSaver(tm) 5.0 control panel
to version 5.0.1. StuffIt SpaceSaver 5.0.1 fixes a bug that prevented
some applications from being able to ÒSaveÓ files correctly when
SpaceSaver 5.0 was installed.

Regarding StuffIt SpaceSaver(tm): Aladdin Systems does not recommend the
use of StuffIt SpaceSaver with Mac OS(r) 8.0 or higher.



SplitIt-20.sit.hqx (split-it-20.hqx)

Download split-it-20.hqx (168,166 KB)


From: hedden@spartanburg.net
Subject: SplitIt-20.sit.hqx


SplitIt! is a file utility which allows you to break up any type of file (even an
application!) into fragments, enabling large files or applications to be
transferred between Macs via floppy disks. Version 2.0 adds PPC native code and
other minor improvements. Requires: System 7.0 or better.




Stego 1.0a2 with Readme in .sit file -PLEASE POST! (stego-10a2.hqx)

Download stego-10a2.hqx (267,178 KB)


From: Romana Machado
Subject: Stego 1.0a2 with Readme in .sit file -PLEASE POST!
Date: Wed, 15 Dec 93 21:38:40 -0800


Stuff and Hex 1.0 (stuff-and-hex-10.hqx)

Download stuff-and-hex-10.hqx (22,927 KB)


From: Chris Owen
Subject: Stuff and Hex 1.0
Date: Mon, 24 Jan 1994 08:00:47 -0400 (EST)



This application REQUIRES the Stuffit Engine=AA which is part of the Stuffi=
t
Deluxe=AA Stuffit SpaceSaver=AA and SITcomm=AA packages.=20

This application is just a quick (15 minute) hack that I did for my own
use and then cleaned up a little for distribution. The purpose of the
application is to first comress and then binhex files for electronic
distribution. It is intended to be used as a drag and drop application.=20
You can use it to choose files, but not folders, from the 'File' menu.

After I had written this it turned out that Drop=A5Stuff (also part of
Stuffit Deluxe=AA package) also does this (I always use Magic Menu rather
than Drop=A5Stuff). I decided to go ahead and distribute it because lots o=
f
people have the Stuffit Engine as part of Stuffit SpaceSaver=AA and
SITcomm=AA, but don't have Drop=A5Stuff.=20

Chris Owen
owen-christopher@yale.edu


StuffCM 2.6J - Japanese Version (stuff-cm-26-jp.hqx)

Download stuff-cm-26-jp.hqx (410,974 KB)


From: chrisli@bridge1.com
Subject: StuffCM 2.6J - Japanese Version


This is the Japanese version of the StuffCM package.

*Rated at 5 Cows (highest rating) from Tucows: http://www.tucows.com/
**Check out MacUpdate's review of StuffCM at
http://www.macupdate.com/reviews/adam/stuffcm.html: "StuffCM is such a
sublime addition to the Mac OS, it's a wonder that it's not built in."

StuffCM is a contextual menu plugin that works with Aladdin Systems' StuffIt
Engine. It can stuff, unstuff, convert, BinHex, segment and join files
directly in the Finder through the contextual menu commands.

The StuffCM package also includes a control panel with lots of settings to
play with, plus the option to assign modifier keys to toggle those settings
on the fly. And it's 100% Appearance Manager savvy! Plus it supports
contextual menus - something many of Apple's own control panels don't!


The History
2.6
- Rebuilt with StuffIt SDK 5.5
- Added the ability to zip and MacBinary-encode files (with StuffIt Engine 5.5)
- Fixed the BinHex creator type field to actually allow input without beeping.



Stufffolder 1.0 (stuff-folder-10.hqx)

Download stuff-folder-10.hqx (47,895 KB)


From: (Reinder Verlinde) reinder@neuretp.biol.ruu.nl
Subject: Stufffolder 1.0

Stufffolder 1.0 is an interface enhancement for StuffIt Lite.
A "Stufffolder" is an ordinary file which is a sort-of mix
between a StuffIt archive and a Finder folder. Drag an item onto
an Stufffolder, and it gets added to the archive. Double-click a
Stufffolder, and it gets opened with StuffIt Lite (similar to
StuffIt deLuxe 4.0's 'True Finder Integration', but less
polished). Freeware, CD ROM publication allowed. Source code
included (note for programmers: the hack used to create this may
be applicable to other archiving utilities)


StuffStuff.sit.hqx (stuff-stuff.hqx)

Download stuff-stuff.hqx (48,239 KB)


Date: Sun, 15 Jan 1995 00:06:09 -0500
From: Christopher Owen
Subject: StuffStuff.sit.hqx

This package has 3 applications that I use for preparing uploads and
such. I keep them all on the desktop to make my life a little easier.
The applications (Stuff, Hex and Both) are drag and drop applicatons
that will stuff, hex and both stuff and hex anything dragged on to
them. Also included is a fourth file which is a empty folder. You
should take the custom icon off of it and put it on an alias to the
Stuffit Engine which can then replace the folder. Then you will have
4 icons that only take up the place of one, yet will perform all the
functions you need to upload and download files.

Chris Owen
owen-christopher@yale.edu


Stuffit Commands OSAX 5.5 (stuffIt-commands-osax-55.hqx)

Download stuffIt-commands-osax-55.hqx (91,923 KB)


From: John Rethorst
Subject: Stuffit Commands OSAX 5.5


The StuffIt Commands OSAX is a scripting addition that adds to your
scripting system the ability to directly interact with the StuffIt Engine
from Aladdin Systems. The StuffIt Engine is included with almost all
commercial and shareware Aladdin products - check your Extensions folder.
If you don't have it, and wish to use this OSAX, download DropStuff
w/Expander Enhancer from the Aladdin web site
().

StuffIt Commands now supports all the new features of StuffIt 5.0 and later
versions, including new commands for Zipping as well as MacBinary and
UUencoding.

The author, Leonard Rosenthol, permits free distribution and use. Further
info available at his web site, www.lazerware.com.

John Rethorst



StuffIt Lite (OS X) 6.5 Installer (stuffIt-lite-65-osx.hqx)

Download stuffIt-lite-65-osx.hqx (6,921,590 KB)


From: Aladdin Systems Public Relations
Subject: StuffIt Lite (OS X) 6.5 Installer


Requirements: Mac OS X, PowerPC processor
License: Shareware
Description: StuffIt Lite combines all four of Aladdin's
award-winning, drag-and-drop access and compression utilities into
one convenient package. StuffIt Lite includes free StuffIt
Expander(tm), along with the DropStuff (tm), DropZip (tm) and DropTar
(tm) shareware utilities.



StuffIt Lite (classic) 6.5 Installer (stuffIt-lite-65.hqx)

Download stuffIt-lite-65.hqx (8,624,897 KB)


From: Aladdin Systems Public Relations
Subject: StuffIt Lite (classic) 6.5 Installer


Requirements: Mac OS 8.1 or later, PowerPC processor
License: Shareware
Description: StuffIt Lite combines all four of Aladdin's
award-winning, drag-and-drop access and compression utilities into
one convenient package. StuffIt Lite includes free StuffIt
Expander(tm), along with the DropStuff (tm), DropZip (tm) and DropTar
(tm) shareware utilities.



Stuffit Binhexer 1.0 AS (stuffit-binhexer-10-as.hqx)

Download stuffit-binhexer-10-as.hqx (5,212 KB)


From: g.giusti@area.it
Subject: Stuffit Binhexer 1.0 AS



Drag&Drop Binhexer for Stuffit Deluxe 4.0. By Giovanni Giusti


Needs Stuffit Deluxe 4.0.

Drag a file over it and Stuffit will Binhex it.

Duel S.p.A.
Via G. Dandini, 15
00154 Roma (ITALY)
Tel. ++39-6-5743826
Fax ++39-6-5759368
e-mail



Stuffit Deluxe 5.1.5 Update (stuffit-deluxe-update-515.hqx)

Download stuffit-deluxe-update-515.hqx (6,129,033 KB)


From: Peter Thomas
Subject: Stuffit Deluxe 5.1.5 Update


Send Files Faster, Access Virtually Anything! The award-winning,
industry-standard StuffIt Deluxe makes your files smaller, so they
transmit faster wherever they're going, whether it's across the office
or around the world. Plus, you'll get more onto a hard drive, Zip(r) disk
or any type of storage media. And with the most comprehensive array of
translators and decoders available, StuffIt Deluxe makes exchanging
files with other Macs, PCs or Unix-based computers easy!

StuffIt Deluxe 5.1.5 is a free Mac OS(r) 9 compatible update.



Stuffit Lite 3.6 (stuffit-lite-36.hqx)

Download stuffit-lite-36.hqx (868,003 KB)


From: Peter Thomas
Subject: Stuffit Lite 3.6


Requirements: System 6.0.4 or higher (7.1.1 or higher for drag-n-drop ability)
License: Shareware, 15-day
Description: About StuffIt Lite

*Fast Stuffing and UnStuffing
StuffIt Lite 3.6 is accelerated for Power Macintosh. Expansion of files on many
platforms is accelerated. StuffIt Lite compresses files an average of 60%,
creating a document called an archive. Archives save disk space, speed modem
and network file transfers, and make backups easier. StuffIt is the international
standard of file compression and archiving on all major online services
(including America Online and CompuServe) and thousands of bulletin board systems.

*Drag and Drop Support
StuffIt Lite 3.6 has drag and drop support making compression and expansion easy
to perform. To expand a file in a StuffIt archive, the user simply drags the
file onto the desktop. A file can be Stuffed by dragging it onto an archive or
into an open archive window. (This drag and drop functionality requires System
7.1.1 or higher.)

*AppleScript Support
A suite of Apple events for registered copies of StuffIt Lite allow the program
to be automated using Apple's scripting technology. StuffIt Lite is also fully
recordable; just like a tape recorder, a user can perform a series of actions
and the script will be automatically written.

*Other Information
StuffIt Lite 3.6 features other capabilities found in previous versions, including
the ability to password protect archives, to create self-extracting archives and
to segment archives for fitting large files across multiple floppy disks. StuffIt
Lite 3.6 comes complete with an online guide.

Aladdin is offering StuffIt Lite 3.6 free to registered users of StuffIt Lite 3.5.
Otherwise, StuffIt Lite 3.6 upgrades cost $15 for all other previous versions.

StuffIt Lite is copyrighted shareware. After using StuffIt Lite for 15 days,
users are honor-bound to send Aladdin a $30 registration fee. By registering
StuffIt Lite, the user receives added benefits including AppleScriptability,
free technical support and updates, enhanced features, and special pricing
on other Aladdin products.



StuffIt AppleScripts.sit.hqx (stuffit-lite-scripts-as.hqx)

Download stuffit-lite-scripts-as.hqx (28,836 KB)


From: macmod (Info-Mac Moderator)
Date: Thu, 4 Nov 93 10:32:36 PST

(5.65c/IDA-1.4.4 for ); Thu, 4 Nov 1993
18:56:12 +0100
Subject: StuffIt AppleScripts.sit.hqx
To: info-mac@sumex-aim.stanford.edu
From: Reinder Verlinde
Date: Thu, 4 Nov 93 18:57:35 +0100
Message-Id: <931104.185735.1348@neuretp.biol.ruu.nl>


These are three AppleScripts for use with StuffIt Lite".

`StuffIt compress` compresses files dropped onto it. Each item
dropped is compressed into its own StuffIt archive and deleted
afterwards.

`StuffIt archive` compresses files dropped onto it. All items
dropped onto it are compressed into a single StuffIt archive and
deleted afterwards.

`Add to sit Archive` adds items dropped onto it to a user-selectable
StuffIt archive. Double-click the applet to select which archive it
will add to and to specify whether items dropped onto it must be
deleted after compression.

These scripts are freeware, but C1993 by Reinder Verlinde. Permission
to distribute this on the Infomac CD Rom and on the Arizona Macintosh
User Group CD Rom is hereby given.

Reinder Verlinde (reinder@neuretv.biol.ruu.nl)


Stuffit sea patches (stuffit-sea-patches.hqx)

Download stuffit-sea-patches.hqx (73,772 KB)


From: (Tom Kroening) tkroenin@earth.inwave.com
Subject: Stuffit sea patches

This is a simple little patch i made with ResCompare.What it does is it
takes out the opening and closing windows on stuffit4.0 self extracting
archive. No more clicking continue and no more hitting quit (it also
eliminates the beep at the end) use this how you want. I have also included
a patch that puts it back in. Have fun, and one more thing, i am not
responsible for any loss of infomation. Use this at your own risk. I use it
myself nd have had no problems. works fine on password encrypted sea's too.


StUU 1.1, a fast UUdecoder for the Mac (stuu-11.hqx)

Download stuu-11.hqx (38,177 KB)


From: Stuart Cheshire, cheshire@DSG.Stanford.EDU
Subject: StUU 1.1, a fast UUdecoder for the Mac

StUU is a lightning fast, Internet Config aware, drag-and-drop
UUdecoder for the Mac.

Version 1.1 dramatically improves performance on Macs with RAM Doubler
or Virtual Memory turned on. (StUU 1.0 thought it had lots of free
memory to use, and then ran really slowly because the memory it was
using wasn't real RAM, it was only virtual memory.)

Stuart Cheshire
* World Wide Web Page
* Stanford Operating Systems and Networking Group Research Assistant
* Stanford Residential Computing Associate
* Macintosh Programmer


Suntar 2.2.3 (suntar-223.hqx)

Download suntar-223.hqx (467,506 KB)


From: Sauro.Speranza@comune.bologna.it
Subject: Suntar 2.2.3


This is version 2.2.3 of suntar, the freeware tar utility for the
Macintosh. It should replace the previous version 2.2.2.



SuperDisk_Utility (super-disk-utility.hqx)

Download super-disk-utility.hqx (27,199 KB)


From: Scott E. Lasley
Date: Thu, 26 Sep 91 11:05:57 -0400
Subject: SuperDisk_Utility

Here is a utility for the disk compression program SuperDisk.
Downloaded from Compuserve. From the doc file:

The SuperDisk! Utilities serve several purposes. They compress SuperDisk!
files tighter by trying different compression options and selecting those that
offer tighter compression and faster performance; they convert other kinds
of compressed files to SuperDisk! compressed files; and they back up your
most recently edited files (coming soon.)

Tar 4.0b (tar-40b.hqx)

Download tar-40b.hqx (41,282 KB)


From: cruff@niwot.scd.ucar.EDU (Craig Ruff)
Subject: Tar 4.0b
Date: Thu, 3 Feb 94 08:42:06 -0700

This is tar for the Macintosh version 4.0b.

It contains rudimentary support for SCSI tape drives and some
other fixes (see included manual).

I am no longer going to make changes or enhancements to tar.
Feel free to take the source (in a separate file) and modify
to suit your needs.

Craig Ruff (cruff@ncar.ucar.edu)


TeachText & SimpleText XTND Translator (teachtext-simpletext-20-xtnd.hqx)

Download teachtext-simpletext-20-xtnd.hqx (17,375 KB)


Date: Tue, 26 Jul 1994 22:45:03 -0700
From: Alan Coopersmith
Subject: TeachText & SimpleText XTND Translator

TeachText/SimpleText XTND Translator version 2.0
Copyright 1992-1994 by Alan Coopersmith. All rights reserved.

Allows applications that use the Claris XTND system to read and
write TeachText & SimpleText documents with pictures and styled
text. It's freeware and has been reported to work with Nisus,
MacWrite Pro, ClarisWorks, and Framemaker.

The biggest change since version 1.0 is the addition of
SimpleText styles.

(Replaces info-mac:app/xtnd-teachtext.hqx
and mac.archive.umich.edu:util/text/xtndteachtext.sit.hqx)

---------------------------------------------------------------

cmp/terrain-man-20 (terrain-man-20.hqx)

Download terrain-man-20.hqx (242,463 KB)


Date: Fri, 4 Nov 1994 17:21:18 -0600
From: steph@wimsey.com (Stephanie Smith)
Subject: cmp/terrain-man-20



--========================_12021677==_
Content-Type: text/plain; charset="us-ascii"

Terrainman 2.0 is a Pict-DXF utility. It will take greyscale Pict files
and convert then into 3D DXF terrain files that you can export to almost
all popular Mac 3D rendering apps.

New features include:

The program now draws in true 3D (with optional perspective) instead of
isometric.
Terrain can be rotated to any of 64,800 views instead of just, um, four.
Predefined views (front, side, top, etc.) let you see your model's true
proportions.
Pictures can be pasted from the clipboard or opened from files.
A "clipping plane" can be used, which will omit all polygons below a
certain altitude.
The display now offers your choice of colors.
Now saves DXF files much MUCH faster.
Will optionally strip leading spaces from DXF files, to make the files smaller.
Even unstripped DXF files are somewhat smaller than they used to be.
Sports a slick new animated splash screen.
Sports several slick new interface graphics.
And finally, Terrainman now sports a slick new PRICE: $10. Freeware no more.



--========================_12021677==_
Content-Type: application/mac-binhex40; name="Terrainman_2.0_f.sea"
Content-Disposition: attachment; filename="Terrainman_2.0_f.sea"


util/ThePerfectWord.cpt.sea.hqx (the-perfect-word-as.hqx)

Download the-perfect-word-as.hqx (23,687 KB)


From: anthony brown
Subject: util/ThePerfectWord.cpt.sea.hqx
Date: Wed, 22 Jun 1994 16:51:06 -0400 (EDT)

If you are an owner of WordPerfect, and hate the idea of having to either
drag an MS Word file onto wordperfect to open it, or if you are an MSWord
owner and hate to have to do the same thing with a WordPerfect file, then
this little applescript droplet is for you!

Drop any number of WordPerfect/MSWord documents onto this Applescript
droplet and then double click on the document and then your favorite
WordProcessor will open them up!

Shareware:
Please post any comments/suggestions to anbrown@husc.harvard.edu

Anthony
--------------------------------------------------------------------------

Tiny Cipher 1.4.1 (tiny-cipher.hqx)

Download tiny-cipher.hqx (341,590 KB)


From: daggilli@vader.eeng.brad.ac.uk
Subject: Tiny Cipher 1.4.1

Please find attached a BinHex archive of Tiny Cipher 1.4.1. This

is a bug fix upgrade to Tiny Cipher 1.4 which removes the dependency

on the NavigationLib shared library used with the new Navigation

Services. It completely supercedes version 1.4





=?iso-8859-1?Q?TransData=81?= 1.2 (trans-data.hqx)

Download trans-data.hqx (145,295 KB)


Date: Sat, 24 Sep 1994 12:38:03 -1000
From: billm@maui.com (William Modesitt)
Subject: =?iso-8859-1?Q?TransData=81?= 1.2



--========================_14834140==_
Content-Type: text/plain; charset="us-ascii"

TransData translates data from one format to another, such as
comma-delimited or fixed-length records to tab-delimited. TransData can
also change all upper case to upper & lower, eliminate duplicate records,
create a ZIP+4 file for submitting to the U.S. Post Office for ZIP+4
processing, and many other useful tasks. Includes a complete user's manual
and example data.

TransData is $10 shareware product. The unregistered version processes a
limited number of records. Upon registering, you will receive a version
that can process an unlimited number of records.



--========================_14834140==_
Content-Type: application/mac-binhex40; name="TransData.sit"
Content-Disposition: attachment; filename="TransData.sit"


Update Translation Package.doc v1.52 (translator-package-152-docs.hqx)

Download translator-package-152-docs.hqx (97,625 KB)


From: markf@knot.QueensU.CA (Mark Fleming)
Subject: Update Translation Package.doc v1.52
Date: Thu, 16 Jun 1994 20:22:51 -0400



--========================_18210396==_
Content-Type: text/plain; charset="us-ascii"

Translation Package v1.52

Author:
By R. Mark Fleming,
521 Albert street, Kingston, Ontario, Canada, K7K 4M5
Phone: (613) 545-2039 E-mail:

Pricing:
Site licenses contact me for pricing at the address above (Educational site
license available for $100.00 / translator).
People who own a site licenses of NetDoctor, the shareware fees are
includes in NetDoctor's site licence. Single user licence to NetDoctor do
NOT cover these shareware fees.

A word about NetDoctor, The Lab & Network Maintainer Package V2.3
The cost of NetDoctor $190(US) per copy + shipping or site licence
$1500(US) + shipping
NetDoctor is simular to InterPoll in it's basic features, but it does not
stop their. It supports querying all current Macintoshes for system
information; querying most network printers (DeskWriters, LaserWriter and
ImageWriters) for printer status, quering AppleShare servers for guest
login rights & volume accessabl and supports SNMP over AppleTalk.

Note:pricing is subject to change without notice.

General information about translators:

Drag & Drop translators:
PICT / BMP, EPS Preview Converter and TEXT Converter

These "Drag & Drop" translators code support the basic AppleScript
commands, and AppleEvents for opening files. Use Apple's Script Editor to
read the applications dictionary. All are Power Macintosh as Native "fat
binary" i.e. PPC code and 680x0 code versions, and the 680x0 processor
version (to save disk space for non-PPC users). The '68K' version are the
same code as the PPC fat versions, so use will only see a difference in
speed if they run the 68K version on PPC.

Apple File Exchange (AFE) Translators:
Graphics: TIFF (IBMpc to Mac), EPSF (IBMpc to Mac), Windoes (.BMP) to PICT
V1.02, B&W (Mac to IBMpc) BMP
Non-Graphics: WordStar to RTF, dBase II && III to CSV

XTND Translators:
Graphics: Window (.BMP), StartUPScreen, PC PaintBrush (PCX)

[On Internet at Info-Mac archives, Archived as
/info-mac/cmp/marks-translators.doc.hqx]



--========================_18210396==_
Content-Type: application/mac-binhex40; name="TranslatorPackage_v1.52.doc.sit"
Content-Disposition: attachment; filename="TranslatorPackage_v1.52.doc.sit"


update Translation Package v1.52 (translator-package-152.hqx)

Download translator-package-152.hqx (633,574 KB)


From: markf@knot.QueensU.CA (Mark Fleming)
Subject: update Translation Package v1.52
Date: Thu, 16 Jun 1994 20:24:13 -0400



--========================_18210396==_
Content-Type: text/plain; charset="us-ascii"

Translation Package v1.52

Author:
By R. Mark Fleming,
521 Albert street, Kingston, Ontario, Canada, K7K 4M5
Phone: (613) 545-2039 E-mail:

Pricing:
Site licenses contact me for pricing at the address above (Educational site
license available for $100.00 / translator).
People who own a site licenses of NetDoctor, the shareware fees are
includes in NetDoctor's site licence. Single user licence to NetDoctor do
NOT cover these shareware fees.

A word about NetDoctor, The Lab & Network Maintainer Package V2.3
The cost of NetDoctor $190(US) per copy + shipping or site licence
$1500(US) + shipping
NetDoctor is simular to InterPoll in it's basic features, but it does not
stop their. It supports querying all current Macintoshes for system
information; querying most network printers (DeskWriters, LaserWriter and
ImageWriters) for printer status, quering AppleShare servers for guest
login rights & volume accessabl and supports SNMP over AppleTalk.

Note:pricing is subject to change without notice.

General information about translators:

Drag & Drop translators:
PICT / BMP, EPS Preview Converter and TEXT Converter

These "Drag & Drop" translators code support the basic AppleScript
commands, and AppleEvents for opening files. Use Apple's Script Editor to
read the applications dictionary. All are Power Macintosh as Native "fat
binary" i.e. PPC code and 680x0 code versions, and the 680x0 processor
version (to save disk space for non-PPC users). The '68K' version are the
same code as the PPC fat versions, so use will only see a difference in
speed if they run the 68K version on PPC.

Apple File Exchange (AFE) Translators:
Graphics: TIFF (IBMpc to Mac), EPSF (IBMpc to Mac), Windoes (.BMP) to PICT
V1.02, B&W (Mac to IBMpc) BMP
Non-Graphics: WordStar to RTF, dBase II && III to CSV

XTND Translators:
Graphics: Window (.BMP), StartUPScreen, PC PaintBrush (PCX)

[On Internet at Info-Mac archives, Archived as
/info-mac/cmp/marks-translators.hqx]



--========================_18210396==_
Content-Type: application/mac-binhex40; name="TranslatorPackage_v1.52.sit"
Content-Disposition: attachment; filename="TranslatorPackage_v1.52.sit"


UnUU 2.1US. Decodes UU files & opens them. FAT. (un-uu-21.hqx)

Download un-uu-21.hqx (43,987 KB)


From: berenger@francenet.fr (Georges-Edouard Berenger)
Subject: UnUU 2.1US. Decodes UU files & opens them. FAT.

UnUU is a tiny Macintosh utility that deals UU coded chunks sent to news
groups. It knows how to rebuild the original file and to decode UU files.
It can give produced files a file type and a creator depending on the file
names suffix. It can even open those produced files.
UnUU requires System 7 or better.
UnUU is a fat binary that works fine & fast on any Mac, but requires a
68020 or better.

UnUU has a very complete feature set, it's very fast, reliable and eficient.

UnUU works very well with NewsWatcher. You just need to tell NewsWatcher to
use UnUU as its "uudecode helper program" in the "Extracting binaries"
preferences settings. A picture can be downloaded, decoded and opened by
your favorite graphic editor in just one keystroke (cmd-B).

If you deal with UU files, try it ! It's probably the most completly
featured utility for uu-decoding file on a Mac. It's also among the fastest
I know of. And it's a PostcardWare !

Size of the archive : 30k (+hqx).

Georges-Edouard Berenger.


This version adds the capability to process files of an abitrary size.


Version 2.1

* If there is not enough memory to read an entire file in memory at once
even with temporary memory, UnUU will read it part by part if the clever
mode is not selected.
* Sped up a few things.

Version 2.0.2

* Tried to improve the notice.
* Fixed minor bugs in the preference dialog box.
* Tuned some integers sizes to be optimal on both 68k and PPC machines.
* Various little comestic changes.

Version 2.0.1

* Removed bug where selecting a file type or creator by expample would
change the specified folder for creating files.
* Improved the way the destination folder is tracked. The destination
folder can now be renamed, moved around, etc.
* Improved the way name conflicts between files and folders are resolved.

Version 2.0

* Created a complete preference dialog box that lets users select ALL
settings (no more ResEdit !).
* One can choose to create the produced file either in the folder of the
source file or in a specified folder.
* Source files can be automatically deleted, moved to the trash, organized
in a folder or left where they are. They can also be renamed after the name
of the produced files.
* Removed the useless debug mode.
* Improved the way name conflicts are resolved.
* UnUU now reports in the about dialog box which code (PPC or 68K) is active.
* Compiled with CodeWarrior 7.


Unzip5.12 (un-zip-512.hqx)

Download un-zip-512.hqx (74,085 KB)


From: dpettit@Phoenix.kent.edu (Douglas Pettit)
Subject: Unzip5.12


[*] UnARJ 2.21 Decompression Utility for the Mac (unarj-221.hqx)

Download unarj-221.hqx (65,428 KB)


Date: Mon, 13 Jul 92 21:49:53 -0400
From: mingo@world.std.com (Charles H Mingo)
Subject: [*] UnARJ 2.21 Decompression Utility for the Mac

[The following is the .doc file with UnARJ 2.21 for the Mac:]

Unarjmac is a simple port of Robert Jung's unarj.c to the Mac. It is a MINIMAL
PORT; that is it makes absolutely minimal use of Mac features. The reason for
this was to minimize the intrusiveness of source code changes into unarj.c,
which will make future updates by Robert Jung easy to keep up with.

UnarjMac does not currently support macintosh path names or creator/type
application linking. Therefore it must be run from the folder your arj file is
in.

Assuming you have the file archive.arj in your folder with unarj, to process the
file you must first launch unarj. You will be presented a dialog that will let
you specifiy a command line that will be accepted by unarj. The command line
operations available are:

UNARJ archive[.arj] (list archive)
UNARJ e archive (extract archive)
UNARJ l archive (list archive)
UNARJ t archive (test archive)
UNARJ x archive (extract with pathnames)
UNARJ (display help screen)

Questions about the Mac implementation may be sent to Eric Larson at
1:260/330@Fidonet. [That's Eric.Larson@f330.n.260.z1.fidonet.org for
you Internet users.]

This is an ARJ demonstration program and ** IS NOT OPTIMIZED ** for speed. You
may freely use, copy and distribute this program, provided that no fee is
charged for such use, copying or distribution, and it is distributed ONLY in its
original unmodified state. UNARJ is provided as is without warranty of any
kind, express or implied, including but not limited to the implied warranties of
merchantability and fitness for a particular purpose. Refer to UNARJ.DOC for
more warranty information. If you find UNARJ of value, a gift of $10 or any
amount would greatly appreciated.

Robert K Jung Internet address : robjung@world.std.com
2606 Village Road West CompuServe userid: 72077,445
Norwood, Massachusetts
02062 USA





Unix2Mac (unix-to-mac.hqx)

Download unix-to-mac.hqx (70,366 KB)


Subject: Unix2Mac
From: Masazumi Takahashi (Numa Project)

If you have trouble reading Japanese text files
downloaded from UNIX machine to the Mac, you might need
this. Macintosh uses Shift JIS for its Japanese character
code. On UNIX machine as I checked EUC or JIS code is often
used. When you download a Japanese text file, e.g., e-mail,
manual, etc., from UNIX machine, you can't read it on the
Mac because of the code difference. Here is how you can
dissolve this problem. Just drag text files to the Unix2Mac
icon. A code exchanged file appears in the same folder.

Regards,
Masazumi Takahashi


unshar 1.11 (unshar-111.hqx)

Download unshar-111.hqx (115,223 KB)


From: sw@nan.co.uk (Sak Wathanasin)
Subject: unshar 1.11

Unshar is a utility to unpack Unix shell archives (shar).
Not all shar files can be processed by this application,
but it will work for the ones in the sumex archives and
those in comp/alt.sources.mac.

Version 1.11 of unshar is a minor update to allow the srcs to be
compiled with CodeWarrior 7 (IDE and MPW-hosted tools).

This program and source code is in the public domain. If you want to
include it on any CDs, please do.

Changes to v1.11: uses the MPW-hosted CW compilers for both 68K and PPC
parts. No functional changes.

Sak Wathanasin
Network Analysis Limited
178 Wainbody Ave South, Coventry CV3 6BX, UK

Internet: sw@network-analysis-ltd.co.uk
uucp: ...!eu.britain.net!nan!sw AppleLink: NAN.LTD
Phone: (+44) 1203 419996 Fax: (+44) 1203 690690


StuffIt--UnStuff/PC.EXE submission (unstuff-msdos.hqx)

Download unstuff-msdos.hqx (132,737 KB)


Date: Mon, 15 Mar 93 16:24:11 CST
From: C526142@MIZZOU1.missouri.edu
Subject: StuffIt--UnStuff/PC.EXE submission

Hi,

I just got my registered copy of StuffIt Lite 3.0.5. Inside the disk there are
a few goodies besides StuffIt Lite and StuffIt Expander like StuffIt &
Frontier, CPT2SIT(3.0.3), UnStuff/PC. The last two pieces are not in the
Info-Mac archive as I checked on Mar. 15 '93. So here is the submission for
the second one, UnStuff/PC in binhexed, (StuffIt) self-extracted format.

The following is from "ReadMe on Macintosh".

> "UNSITINS.EXE" is a DOS executable self-extracting archive that contains
> UNSTUFF.EXE. You will need to move "UNSITINS.EXE" to a DOS machine. Now you
> can send StuffIt archives to your friends who use DOS compatible machines!
> UNSTUFF.EXE enables users of DOS compatible machines to extract files and
> folders from StuffIt archives from 1.5.1 to 3.0.

Regards,

Liu



UnStuffIt 3.0.7 (unstuffit-307.hqx)

Download unstuffit-307.hqx (120,846 KB)


From macmod Thu Sep 30 09:07:07 1993
Date: Wed, 29 Sep 93 19:42:49 -0700
From: leonardr@netcom.com (Leonard Rosenthol)
Subject: UnStuffIt 3.0.7

This self-extracting archive contains UnStuffIt 3.0.7, a freeware
application from Aladdin Systems.

UnStuffIt joins segments & expands archives from StuffIt versions 1.5.1 to
3.0.7. It can also expand StuffIt SpaceSaver files, without SpaceSaver being
present.

UnStuffIt is ONLY for users who send SpaceSaver files or StuffIt segmented
files to people who do not have StuffIt.

To only unstuff files found online, download StuffIt Expander instead.

-----------------------------------------------------------------------------
Leonard Rosenthol Internet: leonardr@netcom.com
Director of Advanced Technology AppleLink: MACgician
Aladdin Systems, Inc. GEnie: MACgician



UUCat 1.1 (uu-cat-10.hqx)

Download uu-cat-10.hqx (46,179 KB)


From: agoates@nyx.cs.du.edu (Alan Goates)
Subject: UUCat 1.1
Organization: University of Denver, Dept. of Math & Comp. Sci.
Date: Fri, 28 Aug 92 04:39:04 GMT


UUCat 1.1 is a uuencoded file concatenation and verification
utility. Version 1.1 adds smarter verification and recognition
of text as well as fixes a few bugs.


UULite 3.0 Release for the Macintosh (uu-lite-30.hqx)

Download uu-lite-30.hqx (495,110 KB)


From: PeanutSW@world.std.com (Jeff Strobel)
Subject: UULite 3.0 Release for the Macintosh

I am pleased to announce the release of UULite version 3.0 for the
Macintosh. UULite is one of the fastest, most powerful and easiest to
use smart uudecoder/uuencoders available for the Macintosh.

UULite is one of the first and best uuencoder/ uudecoders available for
the Macintosh. It's a highly optimized, single-pass, disk-based
uudecoder/ uuencoder. Because it's disk based, it's never necessary to
adjust its memory partition to handle any file -- no matter how large.
UULite version 3.0 now runs native on both Power Macs and 680x0
Macintoshes. If the task is to uudecode/uuencode files, UULite will
save you time and aggravation.

Version 3.0 has the following features:

* One-step Smart uudecoding:
- Multi-part file decoding with automatic header and footer removal - no
editing required
- Ability to decode source files containing multiple output image files
- Drag and Drop decoding of any number of files
- Ability to automatically move source file to the trash
- File Merge and Decode for decoding images from multiple input files
* One-step uuencoding with file splitting to simplify Usenet posting
* Smart automatic file Type and Creator stamping - user configurable
* Manual file Type and Creator editing on any file
* UNIX <=> Mac text conversion
* No Frills uudecoding
* Direct and unambiguous feedback on progress
* Background processing: decode/encode in the background while you work on
other things
* Help and Usenet Read News Tutorial
* Improved NewsWatcher compatibility
* Ability to use other programs as helper programs
- You can now configure UULite to feed decoded files to other programs
(launching them if necessary). Imagine selecting an uuencoded image
file in NewsWatcher, choosing "Extract Binaries" and having the image
decoded and fed to a program like JPEGView for immediate display on
your screen...all in one step.
________________________________________________________________________
System Requirements: Macintosh (680x0 or Power Macintosh) running System
7.0 or greater with at least 500K of available RAM.

Jeff Strobel
jstrobel@world.std.com
PeanutSW@world.std.com
http://www.peanutsw.com


UUParser 1.72 (uu-parser-172.hqx)

Download uu-parser-172.hqx (109,415 KB)


From "jsl@netcom.com (John S. Lee)" Sun May 15 22:27:43 1994
Date: Sat, 14 May 1994 09:11:59 -0700
From: jsl@netcom.com (John S. Lee)
Subject: UUParser 1.72



--========================_7479692==_
Content-Type: text/plain; charset="us-ascii"

To the administator!!:
** The version shipped to you contained incomplete docs and one very minor
bug in the program. These have been corrected and tested. I would GREATLY
appreciate it if you replace the current version with this one.

Thank you,
John S. Lee

Description follows

----------
UUParser 1.72 is now avaialble. This is a major upgrade to version 1.71,
with many fixes, and additional features.

UUParser is one of the easiest to use file strippers and
uuencoders/uudecoders available for the Mac. It support several different
encoding methods (mac->unix, unix->mac, AIFF->ULAW, AIFF->Linear), and is
the fastest decoder avaialbe for the Macintosh. It can operate fully in
the background (for unattended encoding/decoding of several files), and
lots more!

Here are some things you may want to know about UUParser:
UUParser 1.72 & 1.8 features

% Automatic stripping of header information from files "S"aved
from a usenet newsgroup.
% "Smart" uudecoding. Fully user configurable.
% uuencoding of AIFF (sound) files is now supported.
% uuencoding/decoding in PC, UNIX, and AIFF formats.
% User control over output file location.
% Join multiple text files for UUParsing & automatic decoding, from
the menu OR the Finder.
% Split any text file into multiple parts using the Split File function.
% User configurable preferences.
% Automatic scan of text files for anomalies.
% Drag & Drop supported via System 7.
% Parsing/uudecoding/encoding occurs in the background.
% Decodes/encodes/parses/splits/joins ANY SIZE FILE, regardless of memory!
% The FASTEST uudecoding/encoding available for the Mac!
% Many other new features added, with updated documentation!

*Version 1.72 is now the sharware version until further notice.

--- binhex attached ---



--========================_7479692==_
Content-Type: application/mac-binhex40; name="UUParser1.72.sea"
Content-Disposition: attachment; filename="UUParser1.72.sea"


UUTool-FAT(2.4) (uu-tool-24.hqx)

Download uu-tool-24.hqx (88,121 KB)


From: mwieser@acs.ucalgary.ca
Date: Sat, 17 Jun 1995 15:51:48 -0600
Subject: UUTool-FAT(2.4)

UUTool-FAT is the final version of UUTool; it has been tested and
seems to work very, very well.

UUTool 2.4 is accelerated for PowerMacintosh, has the segment and
join sped up, accepts core AppleEvents, and improved balloon help.

UUTool is freeware.

For those who don't know UUTool, it allows fast encoding, decoding
of uu-coded files, translation between UNIX and Mac. audio formats,
and robust text segment/join facilities.


uuUndo 1.0 (uu-undo-10.hqx)

Download uu-undo-10.hqx (59,617 KB)


Date: Mon, 7 Nov 1994 16:38:18 -0500
From: giles@med.cornell.edu (Aaron Giles)
Subject: uuUndo 1.0



--========================_11327733==_
Content-Type: text/plain; charset="us-ascii"

This is the first official release of uuUndo, a fast, free batch uudecoding
utility for the Macintosh. Although uuUndo was originally designed to work
with John Norstad's NewsWatcher, it does quite nicely in its own right as a
standalone drag and drop smart uudecoder.

uuUndo is shipped as a fat binary, running incredibly quickly on PowerPC
machines, and makes full use of asynchronous I/O to ensure smooth operation
in the background. Because it is based on Leonard Rosenthal's DropShell
code, uuUndo is also fully scriptable and recordable. uuUndo requires
System 7.

If you find any bugs or have any comments, please email me at
giles@med.cornell.edu. Thank you.



--========================_11327733==_
Content-Type: application/mac-binhex40; name="uuundo10.sit"
Content-Disposition: attachment; filename="uuundo10.sit"


uucd 2.5 submission (uucd-25.hqx)

Download uucd-25.hqx (108,104 KB)


From: riff@pobox.com
Subject: uucd 2.5 submission


uucd 2.5.5 - uu/base64 decoder

uucd 2.5 is now disk-based, now saves files at the same
place than their sources, and better handles some base64-lifeforms.

http://www.pobox.com/~riff/shareware/uucd/index.html





[*] XBitmap -- convert X11 raster files to PICT (x-bitmap.hqx)

Download x-bitmap.hqx (15,884 KB)


Date: Wed, 16 Nov 94 03:37:53 +0100
From: ____Textpert Alert____
Subject: [*] XBitmap -- convert X11 raster files to PICT

and vice-versa. Written in 1989 by Earle Horton; may therefore
not run under System 7.



XferPro 1.1; encodes and decodes BinHex on a PC (xfer-pro-11.hqx)

Download xfer-pro-11.hqx (184,745 KB)


From: mhaveri@sun3.oulu.fi (Matti Haveri)
Subject: XferPro 1.1; encodes and decodes BinHex on a PC

BinHex is also available for PC. StuffIt Expander-win decodes BinHex;
XferPro can also encode files to BinHex. In addition XferPro handles
Multipurpose Internet Mail Extension (MIME) 1.0, UU and XX.

Note that BinHex (hqx) files must use dos end of line characters (cr & lf),
otherwise this version of XferPro doesn't recognize them.

This file was originally downloaded from:




YellowExtractor 1.3.0 FAT (yellow-extractor-130.hqx)

Download yellow-extractor-130.hqx (170,953 KB)


From: yellowsoft@iol.it
Subject: YellowExtractor 1.3.0 FAT


YellowExtractor, formerly QIMExtractor, may extract from QIM compressed
archive and QIMDocuments. It may also decrypt files encrypted with The
MacLocksmith, if you own the right password, naturally. In addition it may
decode Binhex and MacBinary files.
It is Internet Config aware, Appearance savvy and requires at least System
7 to run.

It can be freely distributed without limits from anyone: it's FREEWARE .

Author: Rocco Moliterno mailto:yellowsoft@geocities.com
Web: http://yellowsoft.home.ml.org/
http://yellowsoft.homepage.nu/
http://www.geocities.com/SiliconValley/Network/7162/extractor.html

New since version 1.2.2:
Removed Spin Cursor, for better memory management. Added ability do decrypt
The MacLocksmith files. Better alerts. Better error infos. Improved
"Internet" routines. Better ModalDialog filters. Changed application name.
Linked with Internet Config 2.0. Linked with MoreFiles 1.4.9. Linked with
Appearance SDK 1.03. Recompiled with Interfaces-Libraries 3.2. Recompiled
by using the newest compiler. All code revisited.



ZipIt 1.4 (zip-it-14.hqx)

Download zip-it-14.hqx (914,203 KB)


From: support@maczipit.com
Subject: ZipIt 1.4


ZipIt 1.4 is a full-featured Macintosh utility to zip and unzip files. ZipIt
allows you to compress files and send them to friends and coworkers working
on PCs, Unix machines, or any other platform where the zip compression
format is standard, and to unzip any zip file as well. ZipIt is fully
compatible with all versions of PKZip, WinZip, and Info-Zip.

In addition, ZipIt allows you to compress Macintosh files without losing
essential Macintosh data. In version 1.4, ZipIt is smarter about which files
are Macintosh files, and which are not, allowing you to easily transmit zip
files to Mac and PC colleagues with no extra hassle.

ZipIt version 1.4 also adds the ability to create self-extracting zip
archives that will operate either on a Mac or a PC running Windows. Now you
don't have to worry about whether or not the person you're sending your zip
file to has an unzipping program. If you specify that the archive should be
self-extracting, then the recipient merely double-clicks on the archive, and
it will unzip itself.

ZipIt is fully AppleScriptable, meaning that you can automate its operation
and perform complex and repetitive archival tasks. Version 1.4 significantly
enhances ZipIt's AppleScript capabilities.

ZipIt is $15 shareware. The ZipIt web site may be found at
http://www.maczipit.com. ZipIt may be included on CD-ROM shareware
collections, provided that the CD-ROM is not sold for profit, beyond a
distribution or compilation charge. ZipIt may also be included on CD-ROMs
that accompany a technical book or publication.